Italdesign Parcour Concept, 2013
Italdesign Giugiaro celebrates 45 years in business at the 2013 Geneva Motor Show by presenting a world première of the Parcour, a type of GT car that did not exist until now; based on the original concept of a Sport Utility Vehicle and, considering its astounding versatility, designed for extensive use on all types of terrain.
The conceptual reference for this type of car could be no other than an original sporting discipline, recent yet already popular and practised across the world. Parcour draws its inspiration from the discipline "invented" by David Belle in France in the 1980s which became famous across the world in recent years thanks to trends in media such as video games, action movies (just think of the opening sequence of 007 Casino Royale) and naturally the Internet, all media used by the younger generations, the ideal reference target for the Parcour.
With a practical control device fitted in the dashboard, the driver can in fact literally adapt the car to its surroundings, choosing from four different settings, one designed for comfortable driving, one for off-road driving, one for winter conditions and, lastly, one for high-speed driving on a race track. The electronic system is triggered to modify the ride, the height above the ground and the engine setup.
Parcour is a two-seater car with four-wheel drive, fitted with a 550 HP Lamborghini V10 5.2-litre mid rear engine capable of accelerating from 0 to 100 km/h in just 3.6 seconds.
The Exterior
The result is the Parcour, a mid-engine sports car with minimum overhangs and broad ramp angles that's ideal for all-track driving".
The new setup is also apparent in the styling, with an exterior design that metabolises the specific features of an SUV, of a Crossover, of a Gran Turismo and those of a mid-engine sports car, combining them in an architecture that is at the same time robust, slimline and light-weight despite the generously sized tyres, produced especially by Vredestein. The latter, fitted on 22" rims, set the style of the car, raising it considerably from the ground (from 210 to 330 mm depending on the selected setting) while the surfaces were designed to reflect elegance, dynamism and sports appeal, while keeping in careful consideration all the aerodynamic requirements.
Designed by Aerodynamics
The style of the exterior was achieved by starting off with a scrupulous analysis of the technical and aerodynamic requirements as well as on-board comfort, naturally.
There are two distinguishing traits of this aluminium and carbon fibre car, coated in the classic Giugiaro Red: the A pillar is detached from the windscreen and also acts as a deflector. In addition to having an architectural role, it conveys the air onto the roof and sides of the car.
The rear pillar on the other hand is designed to direct the air over the bonnet and towards the rear retractable spoiler. This ensures both stability during driving as well as cooling of the powerful 550 HP V10 engine.
This particular setup makes for a very slimline and light-weight car, in the ¾ front view. From the side, the soft silhouette of the body and the octagonal cross-section of the generous wheel arches stand out. The inspiration was drawn once again from the world of SUVs: this optical solution, unlike a more classic-shaped wheel arch, makes it possible to achieve the right proportion between wheel and body at all times, irrespective of the height above the ground, with an electronically- adjustable range of 120 mm.
The passenger compartment is inspired by urban style and is extremely enveloping, almost sticking to the occupants; the driver and passenger are therefore very close together and also to the windows, so that a reduced surface area is used for windows, windscreen and rear window without compromising visibility from the inside.
The exoticism of the Parcour is represented by the two doors, made entirely of carbon fibre. They are butterfly doors, like those fitted on endurance cars: the doors swivel open upwards and inwards; thanks to this solution, getting into the car is more convenient, since the door structure includes a portion of the roof. The cameras replacing the door mirrors are fitted on the upper frame of the doors, where they cross with the A pillar. A third camera, which replaces the rear view mirror, is installed above the bonnet.
In the plan view and the 3/4 view, the two long carbon slits along the entire length of the car stand out. This is an aesthetic trick which helps lighten the optical perception of a two-metre wide car, separating the sides from the body of the car, also via a colour contrast between the red body and the black carbon.
The technical approach to the style of the Parcour also guided the design of the front bonnet and rear boot.
The front view emphasises the three large air intakes which form the grille. Each duct conveys the air required to cool down the three large radiators. The minimised overhang, which is unusual for a mid- engine car, affords a very wide ramp angle, which is ideal for the all-track nature of this vehicle. A small boot was obtained underneath the bonnet at the front, enclosed between the two vertical carbon air intakes.
Similarly, the design of the rear was dictated by aerodynamics: two light clusters tower over a large air intake. The engine, encased between two large pillars-spoilers, is in full view beneath the glass bonnet, as are part of the mechanics. The glass bonnet is inserted in a carbon structure featuring a style marked by the three large horizontal slits and the two vertical air intakes, which are graphically highly emphasised, and are necessary to release the hot air from the engine compartment.
Parcour is a two-seater car with four-wheel drive, fitted with a 550 HP Lamborghini V10 5.2-litre mid rear engine capable of accelerating from 0 to 100 km/h in just 3.6 seconds.
The Exterior
The result is the Parcour, a mid-engine sports car with minimum overhangs and broad ramp angles that's ideal for all-track driving".
The new setup is also apparent in the styling, with an exterior design that metabolises the specific features of an SUV, of a Crossover, of a Gran Turismo and those of a mid-engine sports car, combining them in an architecture that is at the same time robust, slimline and light-weight despite the generously sized tyres, produced especially by Vredestein. The latter, fitted on 22" rims, set the style of the car, raising it considerably from the ground (from 210 to 330 mm depending on the selected setting) while the surfaces were designed to reflect elegance, dynamism and sports appeal, while keeping in careful consideration all the aerodynamic requirements.
Designed by Aerodynamics
The style of the exterior was achieved by starting off with a scrupulous analysis of the technical and aerodynamic requirements as well as on-board comfort, naturally.
There are two distinguishing traits of this aluminium and carbon fibre car, coated in the classic Giugiaro Red: the A pillar is detached from the windscreen and also acts as a deflector. In addition to having an architectural role, it conveys the air onto the roof and sides of the car.
The rear pillar on the other hand is designed to direct the air over the bonnet and towards the rear retractable spoiler. This ensures both stability during driving as well as cooling of the powerful 550 HP V10 engine.
This particular setup makes for a very slimline and light-weight car, in the ¾ front view. From the side, the soft silhouette of the body and the octagonal cross-section of the generous wheel arches stand out. The inspiration was drawn once again from the world of SUVs: this optical solution, unlike a more classic-shaped wheel arch, makes it possible to achieve the right proportion between wheel and body at all times, irrespective of the height above the ground, with an electronically- adjustable range of 120 mm.
The passenger compartment is inspired by urban style and is extremely enveloping, almost sticking to the occupants; the driver and passenger are therefore very close together and also to the windows, so that a reduced surface area is used for windows, windscreen and rear window without compromising visibility from the inside.
The exoticism of the Parcour is represented by the two doors, made entirely of carbon fibre. They are butterfly doors, like those fitted on endurance cars: the doors swivel open upwards and inwards; thanks to this solution, getting into the car is more convenient, since the door structure includes a portion of the roof. The cameras replacing the door mirrors are fitted on the upper frame of the doors, where they cross with the A pillar. A third camera, which replaces the rear view mirror, is installed above the bonnet.
In the plan view and the 3/4 view, the two long carbon slits along the entire length of the car stand out. This is an aesthetic trick which helps lighten the optical perception of a two-metre wide car, separating the sides from the body of the car, also via a colour contrast between the red body and the black carbon.
The technical approach to the style of the Parcour also guided the design of the front bonnet and rear boot.
The front view emphasises the three large air intakes which form the grille. Each duct conveys the air required to cool down the three large radiators. The minimised overhang, which is unusual for a mid- engine car, affords a very wide ramp angle, which is ideal for the all-track nature of this vehicle. A small boot was obtained underneath the bonnet at the front, enclosed between the two vertical carbon air intakes.
Similarly, the design of the rear was dictated by aerodynamics: two light clusters tower over a large air intake. The engine, encased between two large pillars-spoilers, is in full view beneath the glass bonnet, as are part of the mechanics. The glass bonnet is inserted in a carbon structure featuring a style marked by the three large horizontal slits and the two vertical air intakes, which are graphically highly emphasised, and are necessary to release the hot air from the engine compartment.
