Sunday, November 25, 2012

Chevrolet Camaro ZL1 Convertible, 2013

 
 
 
  •  Chevrolet Camaro ZL1 Convertible, 2013

The Chevrolet's most-powerful convertible ever - the 2013 Chevrolet Camaro ZL1 Convertible - made its debut at the 2011 Los Angeles Auto Show. When it goes on sale in late 2012, it will deliver more performance and technology than many exotic cars and ultra-luxury convertibles.

Like the coupe, the 2013 Chevrolet Camaro ZL1 Convertible features a supercharged 6.2L "LSA" engine, SAE-rated at 580 horsepower (432 kW) and 556 lb.-ft. of torque (754 Nm). That's enough to exceed the output of 2+2 convertibles of many performance icons:
  •     2012 Aston Martin DB9 Volante - 470 hp / 443 lb.-ft.
  •     2012 Mercedes SL63 AMG - 518 hp / 465 lb.-ft.
  •     2011 Porsche 911 Turbo S - 530 hp / 516 lb.-ft.
  •     2011 Ford Shelby GT500 - 550 hp / 510 lb.-ft.

The Chevrolet Camaro ZL1 Convertible's power is complemented by advanced powertrain and chassis technologies designed to deliver exceptional performance on the road or track. In fact, it's the same balance of acceleration, handling and ride quality that enabled a Camaro ZL1 coupe recently to lap the Nürburgring's Nordschleife course in 7:41.27 minutes.

From Day One, the architecture for the fifth-generation Camaro was designed to accommodate a convertible model, which gives the ZL1 convertible coupe-like driving dynamics. Four strategic reinforcements enhance the already-stiff body structure to quell the cowl and steering wheel shake common in convertibles:
  •     A tower-to-tower brace under the hood
  •     A transmission support reinforcement brace
  •     Underbody tunnel brace
  •     Front "X" brace and stiffer cradle as well as rear underbody "V" braces.

Additional structural reinforcements in the ZL1 convertible are designed to improve noise and vibration characteristics, while also reducing unwanted ride and body motions. They include a hydrofoamed tube in the A-pillars, an inner reinforcement bracket in the windshield header, a reinforced front hinge pillar and reinforcements inside the rockers.

The suspension of the ZL1 convertible uses the third-generation of Magnetic Ride. New, twin-wire/dual-coil dampers at all four corners enable faster response, with damping levels now adjusted up to 1,000 times per second - about one adjustment per inch of vehicle travel at 60 mph - making the system exceptionally responsive to changing driving and road conditions.

The 2013 Chevy Camaro ZL1 Convertible will also offer Performance Traction Management as standard equipment, which is exclusive to General Motors. First introduced on the Corvette ZR1, it is an advanced system that integrates magnetic ride control, launch control, traction control and electronic stability control, to enhance both launch-acceleration performance and corning.

The result is a convertible designed to preserve nearly all the acceleration, road-holding and performance capabilities of the Camaro ZL1 coupe, which on sale in early 2012.
Read More

Ford C-MAX Hybrid, 2013

 
  •  Ford C-MAX Hybrid, 2013

Ford revealed two next-generation hybrid vehicles - including its first production plug-in hybrid electric vehicle - at the 2011 North American International Auto Show, bringing consumers more choice, versatility and style for high-mileage family-friendly vehicles.

The Ford C-MAX Energi plug-in hybrid and C-MAX Hybrid are based on the new Ford C-MAX five-passenger multi-activity vehicle, and each will offer high mileage and low emissions as well as distinctive body design and a flexible interior. The plug-in hybrid and third-generation full hybrid leverage Ford's global C-car platform, acclaimed powersplit architecture, next-generation driver information features and advanced lithium-ion battery systems.

Ford C-MAX Hybrid is targeted to deliver better fuel economy than the 41 mpg Ford Fusion Hybrid, the most fuel-efficient sedan in America today. It builds on the success of the critically acclaimed powersplit architecture Ford uses in its current hybrids, allowing it to operate in fuel-saving electric mode beyond 47 mph.

Both the C-MAX Energi and C-MAX Hybrid models will be built alongside the all-new 2012 Ford Focus and Focus Electric at Ford's Michigan Assembly Plant in Wayne, Mich. The plant's production is powered in part by one of the largest solar energy generator systems in the state. The C-MAX Energi and C-MAX Hybrid vehicles sold in Europe in 2013 will be built at Ford's plant in Valencia, Spain, starting in 2013.

The plug-in advantage
Targeted to achieve AT-PZEV (Advanced Technology Partial Zero Emissions Vehicle) status, Ford C-MAX Energi provides maximum fuel efficiency by pairing a high-voltage lithium-ion battery and electric traction motor with a high-efficiency Atkinson-cycle gasoline engine. This allows it to run in electric mode before using the gasoline engine.

Ford C-MAX Energi will offer more than 500 miles (800 kilometers) of overall driving range using the battery and engine - more than any other plug-in or extended-range electric vehicle. C-MAX Energi delivers better charge-sustaining fuel economy than Chevrolet Volt.

In general, plug-in hybrid vehicles offer several benefits:
  • Electric driving range, perfect for emissions-free and silent city driving
  • Potential consumer savings on energy and fuel costs thanks to improved fuel efficiency over a standard hybrid
  • Reduced dependency on petroleum and increased energy independence
  • Reduced environmental impact through reductions in greenhouse gas emissions
  • Increased use of electricity from renewable energy sources (e.g. wind and solar), where available, for vehicle recharging
The development of Ford's first-ever production plug-in hybrid leverages more than 200,000 miles of road testing conducted in collaboration with a coalition of 10 utility companies, the U.S. Department of Energy, the New York State Energy Research and Development Administration and the Electric Power Research Institute.

Getting charged up
Ford C-MAX Energi and C-MAX Hybrid will use advanced lithium-ion battery systems developed and assembled in-house by Ford in Michigan. Each system is smartly designed to maximize use of common, high-quality components, such as control board hardware that has proven field performance in Ford's current, critically acclaimed hybrid vehicles.

Li-ion battery packs offer a number of advantages over the nickel-metal-hydride (NiMH) batteries that power today's hybrid vehicles. In general, they are 25 to 30 percent smaller and 50 percent lighter, which makes them easier to package in a vehicle, and can be tuned to increase power to boost acceleration or to increase energy to extend driving distance.

While Ford C-MAX Hybrid will operate much like today's hybrid vehicles, C-MAX Energi will benefit from daily charging to maximize its all-electric range. Thanks to the efficiencies of its right-sized battery system, the plug-in hybrid easily recharges 100 percent overnight on a 120-volt outlet.

A full charge in C-MAX Energi allows owners to increase their driving significantly in all-electric mode and drastically reduce their use of the on-board fuel engine.

On start-up, Ford C-MAX Energi operate in charge-depletion mode, providing electric driving range. When the battery has been depleted or certain conditions are met, it switches to charge-sustaining hybrid mode for continued optimal fuel efficiency.

Ford worked with a supplier to provide an industry-standard five-point plug for C-MAX Energi (and new Focus Electric) that is ergonomically comfortable to hold as well as durably and distinctively designed. The plug handle uses a matte-finished black rubber for a comfortable, non-slip grip and the plug head is shielded with a glossy white hard plastic to protect the electronics. The Ford Blue Oval trademark helps make the device immediately recognizable.

When the cord set connector is plugged into the vehicle's charge port, which is located conveniently between the driver's door and front wheel well, it activates a light ring that loops around the port twice in acknowledgement of connectivity. The light ring then illuminates in quadrants as the vehicle charges. Flashing quadrants represent charge in progress and solid-lit quadrants show stages of charge completion. When the entire ring is solidly lit, the vehicle is fully charged.

Smarter interface
Ford C-MAX Energi owners will have access to a suite of driver information systems - on-board and off-board - designed to help them manage the recharge process, manage the most eco-friendly route on-board, remotely control their vehicle's charge and preconditioning settings, monitor battery state of charge and maximize energy efficiency to extend use of electric mode. Ford C-MAX Hybrid owners also will benefit from the on-board features.

Among these tools is a unique execution of MyFord Touch driver connect technology, especially for electrified driving. It offers exceptional configurability of vehicle information, including fuel level, battery power level, and average and instant miles per gallon.

The cluster's new MyView feature allows drivers to access even more vehicle data such as the electrical demands of vehicle accessories, including air conditioning, which influences fuel economy and the electric driving range of the Ford C-MAX Energi.
The Brake Coach feature helps to educate drivers to optimize their use of the regenerative brakes to recapture kinetic energy and send it back to the battery, also reducing wear on the brakes.

Long-term fuel efficiency can be displayed in two ways - either as a traditional chart or using an innovative display that shows a growing leafy vine on the right side of the cluster. The more efficient a customer is, the more lush and beautiful the leaves and vines become, creating a unique visual reward for the driver's efforts.

To reinforce the message, at the end of each trip a display screen provides distance driven, miles gained through regenerative braking, fuel consumed (average and total) and a regenerative braking score.

New MyFord Mobile
Off-board, Ford C-MAX Energi owners in North America can maintain constant contact with the car anywhere they have mobile phone or web access using the Ford-developed MyFord Mobile.

MyFord Mobile enables access to a secure Ford website and smartphone/feature phone app to get instant vehicle status information, perform key functions remotely, monitor the car's state of charge and current range, get various alerts including when the vehicle requires charging, remotely program charge settings and download vehicle data for analysis.

The feature also allows the owner to program the vehicle to use electricity from the grid to heat or cool the battery and cabin while plugged in. For example, during hot summer months, owners can preprogram the car the evening before to be fully charged - and fully cooled to a particular temperature - by a certain time the following morning. Users can also locate the vehicle with GPS, remotely start the vehicle, and remotely lock and unlock the car doors.

Working with MapQuest, MyFord Mobile can communicate charge station and other points of interest to Ford C-MAX Energi using SYNC's Traffic, Directions and Information (TDI) service. Turn-by-turn guidance is provided by the in-car map-based Navigation System. Drivers can also get up-to-date charging station information in their vehicle directly through SYNC TDI simply by connecting to SYNC Services.

Value charging, powered by Microsoft
Using the value charging feature, powered by Microsoft, Ford C-MAX Energi owners in North America will be able to optimize their home's energy use and vehicle recharging practices. Value charging allows Ford customers to reduce their electricity costs by taking advantage of off-peak or reduced rates from their utility without a complicated set-up process.
 
Proven powersplit technology
Ford C-MAX Energi and C-MAX Hybrid build on the success of the critically acclaimed powersplit architecture Ford uses in its current hybrids, including the Ford Fusion Hybrid, winner of the 2010 MOTOR TREND Car of the Year® award.

In a powersplit hybrid, the electric motor and gasoline-powered engine can work together or separately to maximize efficiency. The engine also can operate independently of vehicle speed, charging the batteries or providing power to the wheels as needed. The motor alone can provide sufficient power to the wheels in low-speed, low-load conditions, and work with the engine at higher speeds.

While this system enables the current Fusion Hybrid to operate in fuel-saving electric mode up to 47 mph, Ford is targeting higher electric operating speeds for Ford C-MAX Hybrid and even more capability for C-MAX Energi, which will have the advantage of additional battery power.

Ford's global C-car strategy
C-MAX Energi and C-MAX Hybrid are two of at least 10 new models or derivatives that Ford will launch around the world based on its new global C-car platform - Ford's first truly global One Ford platform.

Ford's new generation of C-segment vehicles will be sold in more than 120 markets and will account for more than 2 million units annually. The C-segment accounts for one in four cars sold worldwide today and, in conjunction with the B-segment, is expected to rise to 50 percent of all cars sold globally by 2013.

The all-new C-MAX lineup also introduces a number of advanced new technologies to the compact multi-activity vehicle class. More often found only on larger or more premium cars, these technologies are focused on enhanced comfort, safety and sustainability, including the availability of new and powerful, yet highly fuel-efficient, low-CO2 Ford Eco Boost gas engines.

The previous European C-MAX established a reputation for providing a balance of enjoyable driving dynamics and impressive comfort. The all-new model is set to take that performance to a new level, giving drivers a class-leading combination of responsive, sporty handling and overall refinement approaching the standards usually associated with larger, luxury vehicles.

Ford C-MAX Energi and C-MAX Hybrid are two of five electrified vehicles that Ford will bring to the North American market during the next two years. In addition, the Ford Transit Connect Electric small commercial van, built in collaboration with Azure Dynamics, began initial production at the end of 2010, and Focus Electric will launch in late 2011. A second next-generation hybrid electric vehicle will be announced later and available in North America and Europe in 2012.
Read More

Saturday, November 24, 2012

Opel Astra Sedan, 2013

 
 
  • The Opel Astra Sedan, 2013

The Opel is expanding its successful Astra model family with a new sporty and stylish sedan. Featuring typical Astra strengths, including advanced technologies and its widely recognized quality, the new upscale and elegant notchback is a more affordable alternative for customers who would usually opt for this type of car in the mid-size segment. With this new four-door Opel Astra Sedan, the five-door hatchback, the Sports Tourer station wagon and the racy GTC coupe, the line-up of Opel´s top-seller Astra is now complete.

At the start of sales in June 2012, customers can initially choose between seven engines for the new Opel Astra sedan: four gasoline units (74 kW/100 hp to 132 kW/180 hp), of which three can be combined with a six-speed automatic and three diesel engines (70 kW/95 hp to 96 kW/130 hp). The two ultra-efficient Astra notchback 1.7 CDTI ecoFLEX models with Start/Stop system and further efficiency enhancing technologies combine powerful outputs of 81 kW/110 hp or 96 kW/130 hp with diesel consumption figures as low as 3.7 liters per 100 kilometers. This is equivalent to only 99g/km CO2 emissions. In addition to this broad powertrain offer, early next year the new Astra four-door will benefit from the launch of Opel's new highly efficient, powerful and refined SIDI ECOTEC four-cylinder gasoline engine generation with 1.6 liters displacement, turbocharging and spark ignition direct injection.

The new Astra notchback sedan (Length/Width/Height: 4,658/1,814/1,476 mm) has a wheel base of 2,685 mm and provides generous interior space. Its separate trunk offers 460 liters of volume - 90 liters more than the five-door model. By folding the 60:40 split rear bench flat the luggage volume can be increased up to a maximum of 1,010 liters.

Sporty and stylish design combined with balanced proportions
The Opel design team gave the new Astra notchback a very stylish and sleek silhouette. The roofline arcs gently over the passenger area, then descends in a seamless sweep through the steeply raked rear screen to the sculpted aerodynamic lip at the end of the short rear deck. And because the raked C-pillar stretches so far back into the rear deck area, it visually conceals the size of the trunk in an elegant fashion. The feature line running through the door handles becomes more defined towards the rear, creating a muscular "shoulder" effect below the base of the C-pillar and the rear deck.

The rear is characterized by the steeply raked rear screen, the integrated deck spoiler, and the broad sweep of the sculpted bumper. The design of the tail lights echoes those of other Astra models, and the subtle crease which links them adds width and avoids any impression of bulkiness. The lamps also have an inner wing shape for the taillight function that continues the Opel brand signature. There are more sculptural features within the bumper where the number plate indent reflects the shape of the deck-lid cutout. Together, all these elements combine to create a particularly well-balanced and harmonious automotive design.

The Vice President of Design, Mark Adams, says: "The Astra model family implements our design language with sculptural artistry meeting German precision in a very dynamic fashion. All body style variants have their very own personality. We believe that the Astra four-door sedan we're now launching is the best proportioned and most stylish notchback currently available in the compact segment." Customers who wish to make their Opel Astra Sedan even more attractive visually, can choose from a wide offer of wheel designs of sizes up to 19 inches.

Top technology standards and typical Astra qualities in notchback segment
With its sporty, elegant design, typical Astra qualities and a large array of technological highlights - some are unique, some are unusual for the segment - Opel´s new compact four-door notchback targets customers with high expectations. The Advanced Forward Lighting (AFL+) with bi-xenon headlamps and a host of sophisticated lighting functions including variable light distribution, curve light, cornering light and high-beam assist greatly enhance active safety. The adaptive FlexRide chassis system automatically adjusts damping to the prevailing driving conditions and gives the driver the choice between three different modes - Standard, the comfort-oriented Tour mode and the more responsive Sport mode. The highly ergonomic AGR ("Aktion Gesunder Rücken e.V") approved seats that are easy on the back are available for the driver and the front passenger. Added to that are several infotainment systems which make travelling even more relaxing and safer. The Navi 900 top unit features the routes of more than 30 European countries and a digital travel guide stored on an SD card.

Compact notchbacks offer growth opportunities
The new four-door Opel Astra Sedan is an important addition to the latest generation of the successful Astra model family. In Western Europe, especially in Germany and Spain, Opel marketing experts see growth opportunities for the new four-door model as an elegant, more affordable alternative to sedans from the upper segment. 
Moreover, there is strong demand for compact notchback variants in the high growth markets of Eastern and Central Europe, particularly Russia and Turkey. Russia currently has the second highest sales volume in Europe and is expected to become Europe´s main market with up to 3.4 million total vehicle sales in 2014. Across all segments, more than 60 percent of all sedans sold in Europe are sold in Russia. Last year, in the compact segment 51 percent of customers there opted for a notchback version. Russia is also the third biggest market for the Astra in Europe. Therefore, Opel has decided to celebrate the world premiere of the new member of the Astra model family at the 2012 Moscow Auto Salon (August 29 - September 9).
Read More

Mini John Cooper Works Coupe Endurance, 2011

 
 
 
 
  •  Mini John Cooper Works Coupe Endurance, 2011

Motor sport is in the MINI genes. And now the carmaker is set to add a new chapter to its racing heritage with the arrival of the MINI John Cooper Works Coupé Endurance. The newly developed racer will line up at the 2011 24-hour race at the Nürburgring-Nordschleife circuit.

With the participation of the MINI John Cooper Works Coupé Endurance, the Nürburgring 24-hour race will be staging an automotive world premiere for the first time in its history. At the same time, the extreme demands of the classic endurance event ensure the new MINI model will be given a baptism of fire.

MINI's declared aim in entering the Nürburgring 24-hour race is to experience the adventure of the "Green Hell", as the Nürburgring-Nordschleife is affectionately known. And the brand has called, among other things, on the experience gained over many years of MINI Challenge sprint racing in the development of its new racing car for this unique event.

A pure-bred racing set-up will equip the MINI John Cooper Works Coupé Endurance for a full day lapping the combined Nordschleife/Grand Prix circuit at race speed. Providing the power is a specially-tuned version of the series-produced MINI John Cooper Works engine. The 1.6-litre four-cylinder unit - which boasts a twin-scroll turbocharger and petrol direct injection - delivers 250 hp, and the Overboost function pushes peak torque up to 330 Newton metres. Top speed is in excess of 240 km/h.

The MINI John Cooper Works Coupé Endurance sees the brand's customary go-kart feeling taken to a whole new level. The stiff race suspension ensures impressive roadholding and gives the driver constant, direct feedback from the road surface. Adjustable shock absorber units allow the suspension set-up to be adapted to fluctuating track conditions, a feature that will come in particularly handy at the Nordschleife.

The more steeply raked windscreen of the car's flat coupé silhouette sets it apart clearly from the Hatch and helps to minimise aerodynamic drag, which the drivers will acknowledge with a smile on the circuit's long straights.

The John Cooper Works Aerodynamics Package further enhances the Coupé's already supreme handling; the front spoiler, rear diffuser and adjustable rear wing generate downforce, optimising the balance between the front and rear axle.

The MINI John Cooper Works Coupé Endurance achieves an exceptionally high level of safety thanks to features including a roll cage welded to the body and a sports bucket seat with six-point safety belt and Formula One-style HANS (Head And Neck Support) system. When it comes to active safety, the car adopts the proven braking system with Race ABS from MINI Challenge racing and adds a specially tuned DSC dynamic control system, likewise optimised for the race track. Plus, in the interests of safety - and rapid pit stops - the MINI John Cooper Works Coupé Endurance is kitted out with an integrated pneumatic jack.

Technical data
  • Engine: Tuned version of series-produced MINI John Cooper Works engine with adapted engine management. Four-cylinder in-line engine (front/transverse-mounted) with twin-scroll turbocharger and petrol direct injection. Racing exhaust system
  • Displacement: 1,598 cc
  • Power output: Approx. 184 kW / approx. 250 hp
  • Max. torque: Approx. 330 Nm (incl. Overboost)
  • Top speed: > 240 km/h
  • Power transfer: Front-wheel drive, sequential six-speed gearbox with electronic differential lock
  • Suspension: Independent race suspension (KW Suspension) with adjustable compression and rebound, adjustable front strut brace
  • Tyres: Racing tyres (Dunlop) / slicks: 215/45 R17, wets: 205/620 R17, 17-inch racing rims (Borbet)
  • Body: John Cooper Works Aerodynamics Package, adjustable rear wing, rear diffuser acc. to regulations, pneumatic jack
  • Safety: MINI Challenge braking system with Race ABS, race-tuned DSC, welded-in roll cage, six-point safety belt, racing seat (Recaro) with HANS system, main switch concept with electronically controlled fire extinguishing equipment
  • Interior: Racing steering wheel (Sparco), Drive Data Display with shift display
  • Weight: 965 kg
  • Wheelbase: 2,467 mm
  • Tank capacity: 100 litres
Read More

Friday, November 23, 2012

Kia Ceed, 2013

 
 
 
 
  •  Kia Ceed, 2013
Making its global premiere at the 2012 Geneva International Motor Show is the all-new Kia cee'd. More sophisticated, more efficient, more refined and with a more engaging driving experience than its predecessor, new cee'd is expected to build on the success of the original model, further establishing Kia as one of the leading automotive brands in Europe.

Launched in 2007, the original cee'd was a landmark and game-changing model for Kia. Designed, developed and built in Europe, cee'd was the first model to establish Kia as a serious contender to the established brands. Winning praise from media and public alike for its all-round ownership proposition, cee'd claimed fourth place in the European Car of the Year Awards that year - the highest ever ranking for a Kia vehicle.

New cee'd five-door goes on sale across Europe from the second quarter of 2012, depending on market, and will play a significant role in driving Kia's sales in Europe even higher. Further information about other models in the new cee'd family - including the SW version displayed at Geneva - will be made available later this year.

Longer, lower and more streamlined
New cee'd is both longer and lower than its predecessor, giving the five-door hatchback a more sporty profile. Overall length is increased by 50 mm (to 4,310 mm) and overall height has been reduced by 10 mm (to 1,470 mm) by lowering the ride height. Despite being based on a completely new platform, new cee'd carries over the 2,650 mm wheelbase, one of the longest in the C-segment, from its predecessor.

This more athletic appearance is further enhanced by a wider track. While the overall bodyshell is 10 mm narrower, the front and rear track have been increased (by 17 mm and 32 mm, respectively). The impact on the car's aesthetics is heightened by the availability of 17- and 18-inch diameter alloy wheels, resulting in a minimal gap between tyres and bodywork.

The new model's sleek silhouette was shaped by extensive testing in the state-of-the-art wind tunnel at Kia's R&D centre at Namyang, Korea. A reduced windscreen angle, smooth covers beneath the engine bay and the central floor, a rear spoiler above the tailgate and carefully profiled rear lamp clusters all help new cee'd achieve a Cd figure of just 0.30, placing it among the best-in-class, and helping to reduce fuel consumption and cabin noise.

New Kia cee'd will be manufactured exclusively at Kia's Zilina facility in Slovakia in a range of 10 exterior colours - including five new - and will be among the first models to bear the new-look Kia badge on its bonnet. Simpler, sleeker and with a more modern appearance, the new badge design echoes the premium feel of new cee'd and incorporates the Kia script in a single raised section for greater legibility.

Powerful and efficient engines with six-speed transmissions
In developing new cee'd, Kia's engineers had a strong focus on reducing fuel consumption and emissions without sacrificing engine response or power output. Updated engines and various small but impactful changes have resulted in an average fuel consumption improvement of four per cent across the model range.

Depending on individual market preferences, the new cee'd will be available with a wide choice of engines offering power outputs from 90 to 135 ps. Across most of Western Europe there will be two petrol engines - a 1.4 MPI and a 1.6 GDI producing 100 and 135 ps respectively - plus two diesels - a 1.4 WGT with an output of 90 ps and 1.6 VGT diesel offered in two states of tune (110 and 128 ps). Certain markets in Europe will also offer a 1.6 MPI petrol unit producing 130 ps.

Kia anticipates that its top of the range diesel - the highly-efficient 1.6-litre variable geometry turbo unit - will be the most popular choice in most markets. Generating 128 ps and 260 Nm, the engine will be offered with a choice of six-speed manual or automatic transmissions and will accelerate the new cee'd to 100 kph in less than 11 seconds. Fuel consumption will be just 4.1 l/100 km on the combined cycle (3.7 l/100 km in cars fitted with Kia's EcoDynamics technologies), and CO2 emissions start at just 97 g/km.

The 'Gamma' petrol engines also offer an excellent balance between performance and economy. The most powerful, the 1.6-litre Gamma GDI engine introduced in the Kia Sportage, features direct injection to maximise power (135 ps) and torque (165 Nm) while minimising fuel consumption and emissions. With this engine, new cee'd will accelerate to 100 kph in 9.9 seconds while delivering fuel consumption of 5.8 l/100 km (5.2 l/100 km with EcoDynamics), and tailpipe CO2 emissions from 119 g/km.

All engines will be offered with a choice of manual or automatic six-speed transmissions. Depending on version, the 1.6 GDI will also be available with Kia's all-new six-speed Dual Clutch Transmission (DCT), which improves fuel efficiency and delivers smooth automatic gear shifts for maximum comfort.

Developed by Kia's in-house transmission development team in partnership with a German-based engineering firm, the DCT makes the Korean brand one of a very small number of car makers in the world to produce its own dual-clutch transmission.

The DCT combines two manual transmissions within a single housing, each with its own dry clutch. One transmission shaft is dedicated to 2nd, 4th, 6th and reverse gear, while the other operates with 1st, 3rd and 5th gears.

Working in parallel, one shaft prepares to engage the next ratio, while the other is still engaged with a gear. Electric motor-driven actuators controlled by the Transmission Control Unit (TCU) execute gear selection and clutch engagement, resulting in swift and precise gear changes and uninterrupted torque transfer to the driven wheels, with a minimum of the efficiency loss normally associated with conventional automatics (with a torque converter).

As with other Kia models in Europe, new cee'd will be available with fuel-saving technologies developed under the company's EcoDynamics™ sub-brand to optimise efficiency and lower emissions. These technologies, which will be available on both diesel and petrol models with manual transmission, include ISG (Start/Stop), low-rolling resistance tyres and an alternator management system (AMS).

Smoother ride with improved handling, plus variable power steering
Ride and handling for new cee'd was benchmarked against class-leading competitor vehicles from near-premium brands.

Fully-independent, subframe-mounted suspension with MacPherson struts at the front and a multi-link set-up at the rear exploit the newcomer's wider track to deliver improved handling and road-holding.

The hugely increased torsional rigidity of the new cee'd bodyshell (45 per cent stiffer than the original model), has also enabled Kia's engineers to introduce numerous small changes to components, springs and shock absorbers that influence ride quality, refinement and NVH.

Improvements to the front suspension include an increased castor angle (from 4.4 to 5.2 degrees) for greater straight-line stability, larger wheel bearings in a reinforced hub, and larger diameter bushes for the subframe attachments. At the rear, geometry changes ensure more accurate tracking, the trailing arms have larger bushes and friction has been reduced throughout the system.

The standard steering system employs electric power-assistance and requires 2.85 turns lock-to-lock for a 10.34-metre turning circle. New cee'd is also available, on certain models, with an all-new Flex Steer™ system for improved driving dynamics. This system introduces three operating modes - comfort, normal and sport - allowing the driver to vary the level of steering assistance and the weight of feedback, in order to best suit the current driving conditions and the driver's personal preferences.

Less cabin noise, more cabin space

Kia's engineering team was determined to achieve significant improvements over the previous model in terms of cabin refinement and NVH. Measures adopted include fitting 14 per cent thicker front door window glass, low-drag exterior mirror housings, new vibration-damping engine mounts, hollow drive shafts, stronger bodyshell joints between the sills and B-pillars, double-layer door seals, and increased foam-filling in the A-, B- and C-pillars. As a result of these measures, cabin noise levels have been cut to match class-best standards.

Although the 2,650 mm wheelbase is carried over for new cee'd, the increase in overall length contributes to more interior space for people and cargo. Front seat occupants have 12 mm more headroom and 21 mm more legroom, while rear passengers gain 5 mm of shoulder room. Cargo capacity is boosted by 12 per cent to 380 litres (up 40 litres) with the rear seats upright and the split-folding rear seats can be made fully flat for maximum versatility.

High-quality equipment and advanced technologies
Higher quality cabin materials and a broader range of high-tech equipment will ensure the interior of new cee'd matches the premium exterior appearance.

Primary and secondary controls are grouped in a driver-oriented layout for intuitive ease of use, while new standard equipment will include tilt and telescopic steering wheel adjustment, iPod, Aux and USB support, six speaker audio system and a multi-mode trip computer.

A choice of bright chrome, piano black and anodized metal trim accents will be offered, while indirect LED lighting of the centre console and sweeping 'vertical fin' door handles establish an upmarket ambience for the cabin. The seat and cabin trim will be available in a choice of two colours as standard - black one-tone and stone beige two-tone - in cloth, with a full leather interior available on high specification versions.

Available features will include enhanced instrumentation - with a TFT 'Supervision' Cluster delivering high-definition resolution clarity of the instrument binnacle, dual-zone climate control, powered driver's seat adjustment with memory and a full length (1,045 mm long) powered panoramic glass sunroof.

New Kia cee'd will be available, depending on version, with LED daytime running lights, fixed cornering lamps (illuminated depending on steering angle), and advanced HID headlamps that turn the low beam to match curves in the road and enhance the driver's night vision.

Parking can be made easier with the new Parallel Park Assist System (PPAS). This features front, side and rear sensors and automatic steering control by an on-board computer to safely perform parallel parking. The driver remains in control of the accelerator and brake.

Safety structure and features target maximum rating
Kia continues to make safety a top priority and the new cee'd features advanced active and passive safety technologies to ensure maximum protection for its occupants and other road users. Kia is determined to achieve the maximum rating when tested by EuroNCAP with this new model.

Available active safety features will include ESP (Electronic Stability Program), ABS (anti-lock braking system), BAS (emergency Brake Assist System), HAC (Hill Assist Control) to prevent roll-back, VSM (Vehicle Stability Management) and ESS (Emergency Stop Signal) which flashes the brake lights when the system detects that the driver is making an emergency stop.

In terms of passive safety, the bodyshell is constructed using a high percentage (57 per cent) of ultra high-tensile steel and features numerous improvements to enhance impact resistance. New transverse cross-members are fitted to link the front and rear suspension mounts, new pressings link the rear trunk floor to the tailgate opening and the rear roof rail is connected to the C-pillars and a new floor cross-member to create an extremely strong 'safety ring'.

Side impact protection is enhanced with 50 per cent thicker door beams, plus a stronger roof cross-member between the B-pillars and side sills made from ultra high-tensile steel.

Each new cee'd is fitted with six airbags as standard - front, front side and full length curtain. Pedestrian safety is improved with the adoption of collapsible headlamps, a stiffer lower bumper lip, and shock-absorbing structures in the hood and its hinges.
Read More

Hyundai Elantra Coupe, 2013

 
 
 
 
  • Hyundai Elantra Coupe, 2013

Hyundai introduced the Elantra Coupe variant to its industry-leading Elantra line-up at the 2012 Chicago Auto Show. This two-door coupe model of the Elantra sedan, available this spring, will attract even more buyers to the Elantra line-up, further expanding its appeal to savvy consumers. It offers many of the same attributes that made the sedan version a sales success, while broadening its market reach to youthful, sporty buyers willing to forgo four-door versatility for coupe design appeal. The 2013 Hyundai Elantra Coupe marks the continuing evolution of Hyundai's "Fluidic Sculpture" design theme with sporty design language, while assuming a compact coupe segment leadership position with an eco-efficient powertrain, generous convenience features, exceptional roominess and abundant safety features.

Hyundai Elantra Coupe is the latest vehicle in Hyundai's 7/11 product initiative (seven new models in the next eleven months), following the Azera and Genesis Coupe.

The 2013 Elantra Coupe represents a modern approach to the sporty coupe segment, using youth-oriented design and premium features offered with Hyundai's strong value proposition. The 2013 Hyundai Elantra Coupe poses intriguing questions:
  • Why can't a sporty coupe combine generous interior space with sleek design?
  • Why pay premium coupe prices to get advanced safety and technology features?
  • Why can't a fun-to-drive sporty coupe offer 40-mpg fuel economy?
"FLUIDIC SCULPTURE" DESIGN LANGUAGE
Elantra Coupe takes Hyundai's dynamic "Fluidic Sculpture" design principles to the next level. "Fluidic Sculpture" design language replicates the interaction of wind with rigid surfaces to create a perception of fluid in motion.

Hyundai's signature hexagonal front fascia opening and jeweled swept-back headlights give Elantra Coupe a lean, aggressive demeanor. Fog lights and available side mirror repeater lamps complement the view from the front.

From the side, Hyundai Elantra Coupe conveys a wedge-like sport coupe silhouette with deeply sculpted surfaces. SE model sporty five-spoke 17-inch alloy wheels with dark spoke inserts add a dynamic presence, while fast A- and C-pillar angles frame a sharply tapered greenhouse, further accentuating the wedge profile. Just below the belt line, a prominent character line carries from the door through to the rear deck. Wheel arch creases give a subtle flared appearance around front and rear wheels, for a wide and aggressive presence. Further, a beveled rocker panel rounds out the lean and muscular effect.

From the rear, a blacked-out rear diffuser valance contrasts with dual chrome-tipped exhaust tips, and the SE model deck lid incorporates a lip spoiler design element.

These sculpted surfaces serve to create a highly aerodynamic body. The drag coefficient for the Hyundai Elantra Coupe is an exceptionally low 0.28 Cd, resulting in minimal cabin noise intrusion and optimal fuel economy. Elantra Coupe was designed at Hyundai's North American Design Center in Irvine, Calif.

40-MPG POWERTRAIN
Under the hood, the Hyundai Elantra Coupe is powered by the same 1.8-liter Nu four-cylinder engine with 148 horsepower (estimated) and 131 lb-ft of torque (estimated) found in the Elantra sedan (145 horsepower and 130 lb-ft of torque for Elantra Coupe PZEV). This high power-density 4-cylinder puts out a full six percent more horsepower than the Civic Coupe 1.8-liter. Thanks to advanced clean engine technology, most Elantra Coupes sold in California, Oregon and several Northeast states are certified as Partial Zero Emission Vehicles (PZEV) by the EPA. The PZEV Elantra Coupe is as clean as many hybrid electric vehicles, without the extra technological complexity and cost. The PZEV Elantra Coupe helps Hyundai meet and exceed its environmental requirements. Outside of these "green" states, the Hyundai Elantra Coupe is available as an Ultra Low Emission Vehicle (ULEV).

The Nu engine features an aluminum block with a cast-iron cylinder liner, cylinder head and crank. This unique configuration results in a block that is 30 percent lighter than an iron block, shedding more than 74 pounds of engine mass, while still providing equivalent strength.

The 1.8-liter Nu also offers Dual Continuously Variable Valve Timing (D-CVVT) camshafts and hydraulic engine mounts for optimum power, efficiency and refinement. Using D-CVVT on both camshafts has several advantages when compared with using it just on the intake camshaft. These advantages include a two-percent improvement in performance (via increased volumetric efficiency), two-percent improvement in fuel economy (via reduced pumping losses) and a 30 percent reduction in hydrocarbon emissions. In the valvetrain, roller swing arms and hydraulic lash adjusters reduce valve-driven friction to improve fuel economy one percent compared with direct valve tappets. The Nu engine also features a maintenance-free silent timing chain to enhance durability and reduce noise, vibration and harshness (NVH).

A plastic two-stage Variable Intake System (VIS) enables intake air to be directed between long and short intake manifolds, resulting in a broad, linear power band. This results in a four-percent improvement in performance, a 15 percent reduction in cost and 30 percent reduction in weight, when compared with aluminum.

Another technology Hyundai engineers have incorporated into the Hyundai Elantra Coupe is an electronic throttle control. Electronic throttle control replaces the conventional cable and mechanical linkage with instantaneous computerized control. This system accurately controls air intake and engine torque, improving drivability, response and fuel economy.

To further improve fuel economy, Elantra Coupe applies double-pipe plumbing technology to the internal heat exchanger. Double-pipe plumbing improves cabin cooling efficiency, while minimizing compressor size, reducing fuel consumption. In addition, an externally-controlled variable compressor is used to improve fuel efficiency when compared with an internal variable compressor.

The Nu four-cylinder engine also has an offset crankshaft design that reduces friction and pressure between the piston and cylinder wall for a one-percent improvement in fuel economy.

Hyundai Elantra Coupe's fuel economy is estimated at 29 mpg city, 40 mpg highway for the six-speed manual transmission, and 28 mpg city, 39 mpg highway for the six-speed automatic transmission. These ratings give Elantra Coupe a highway-only driving range of up to 500 miles.

SIX-SPEED TRANSMISSIONS
The Hyundai Elantra Coupe can be equipped with a six-speed manual (M6CF3-1) or automatic (A6GF1) transaxle with SHIFTRONIC® manual control. Hyundai now has in-house six-speed automatic transmissions in its small, medium and large FWD cars. Hyundai is also only one of four global car manufacturers building in-house unique six-speed automatic transmissions.

The six-speed automatic is 11 pounds lighter than Hyundai's global five-speed. It is considerably simpler, having 62 fewer parts, for greater durability, lighter weight and lower cost. It also features an ultra-flat torque converter that shortens the unit's overall length by 0.43 inches, while being 2.6 pounds lighter.

The transmission, mated to the 1.8-liter Nu engine, helps Elantra Coupe deliver improved fuel efficiency - 11 percent more than its closest competitor, the Honda Civic Coupe.

The Hyundai Elantra Coupe's six-speed manual transmission offers positive shift feel and further optimizes powertrain performance. Shifting performance is facilitated by durable triple-cone synchronizers for first and second gears, with double-cones for third gear and a single-cone for fourth, fifth and sixth gears.

OVERALL DIMENSIONS
The Elantra Coupe rides on a 106.3-inch wheelbase, an overall length of 178.7 inches, 69.9-inch width, and 56.5 inch height for uncompromised headroom. Elantra's total interior volume of 110.2 cubic feet exceeds the 2012 Honda Civic Coupe and 2012 Kia Forte Koup by large margins. The Coupe's long wheelbase allows for compact coupe efficiency with class-above relative comfort levels. Hyundai Elantra Coupe's trunk volume at 14.8 cubic feet also beats Civic Coupe and Kia Forte.

ELANTRA COUPE ARCHITECTURE
The Elantra Coupe is fitted with a McPherson strut front suspension, with coil springs and gas shock absorbers. The rear suspension is a lightweight coupled torsion beam rear design for enhanced steering stability and monotube shock absorbers for ride comfort and control. A substantial 22.0-mm diameter front stabilizer bar helps reduce body roll and turn-in response when cornering. Steering knuckle design, torsion beam rigidity and damper tuning have all been recalibrated for sportier handling and steering responsiveness compared with Elantra sedan. In addition, Hyundai Elantra Coupe offers a sportier SE model suspension calibration that is optimized for its lower-profile P215/45R17 tire.

All Elantra Coupes have column-mounted, motor-driven electric power steering (MDPS) that adjusts instantly to changing driving conditions while improving fuel economy over a hydraulic steering system. A quick-ratio steering rack is used for crisp feel on turn-in.

World-class weight efficiency was a key program target for the Elantra Coupe engineering team. As a result, Hyundai Elantra Coupe leads the Kia Koup in weight efficiency, while leading the Civic Coupe in power-to-weight ratio; both are key measures of overall powertrain and structural efficiency.

High-strength steel in Elantra Coupe's structure allows the suspension to work with precision in all driving conditions. This weight-efficient unibody architecture allows for Elantra Coupe to achieve an estimated 40-mpg EPA highway rating, without the need for a special eco model and its incremental costs.

SPORTY, SOPHISTICATED INTERIOR
Inside the Hyundai Elantra Coupe, customers will find Hyundai's expertise in interior packaging, lighting, leading-edge design and craftsmanship. This approach is visible in gauge clarity and the tilt and telescopic steering wheel. Seat construction uses lightweight materials and environmentally-friendly foam for further benefits to fuel efficiency. Elantra Coupe seat design also provides deeper side bolsters compared with Elantra sedan for sportier driving. Heated seats are standard equipment on all Elantra Coupes, while the SE model offers sporty aluminum pedals.

The Hyundai Elantra Coupe offers two interior color choices, gray and black, available with either the GS or SE trim. All Elantra Coupes have cloth-like pillar trim made of fibrous tissue and volcanic rock for a premium look, feel and minimal environmental impact. Elantra Coupe will offer seven exterior colors, three of which are unique from Elantra sedan color choices: Monaco White Black Noir Pearl and Volcanic Red.

Hyundai Elantra Coupe is available with two audio systems. Standard is a 172-watt AM/FM/Satellite Radio/CD/MP3 audio system with six-speakers and iPod®/USB/auxiliary input jacks. A 360-watt system with external amplifier is optional with the SE Technology package.

Touch-screen navigation is available on SE trim and includes a high-resolution 7.0-inch screen and voice-activation by headliner-mounted microphone. The sound system plays compact discs, accesses digital music files via Bluetooth streaming audio or allows driver and passenger to access their personal listening devices through the iPod/USB/auxiliary inputs. Bluetooth audio wirelessly streams music from select mobile phones to the head unit. The XM Satellite Radio interface is also integrated into the navigation unit and features channel logos, real-time NavTraffic and XM Data services, such as XM NavWeather®, XM Stock Ticker and XM Sports Ticker. The system also integrates a rear-view camera, which cannot be found on the Honda Civic Coupe or Kia Koup. Users can even upload personal pictures from a USB rather than a CD to be displayed on the system's home screen.

Elantra Coupe owners can also get premium features, such as proximity key with push-button start, leather seating surfaces, heated front seats, power sunroof, and dual automatic temperature control with Clean Air Ionizer and auto-defogger.

ADVANCED STANDARD SAFETY TECHNOLOGIES: PART OF HYUNDAi'S ASSURANCE COMMITMENT
The Hyundai Elantra Coupe takes compact coupe safety to the next level with the introduction of Vehicle Stability Management (VSM). Similar to the one found in the Hyundai Equus, VSM optimally manages ESC (Electronic Stability Control) and the Motor-Driven electric Power Steering (MDPS).

VSM works to control two effects. The first is when a driver accelerates or brakes on a split-mu surface (slippery on one side, dry pavement on the other) and the vehicle wants to pull in one direction. VSM detects this condition and sends a signal to the MDPS to apply steering assist. VSM counters the pull and automatically provides eight Newton meters of counter steering force. VSM reacts the same way during sudden lane changes or fast cornering. ESC is still not standard on the Civic Coupe.

Elantra Coupe features six airbags—including dual front, front seat-mounted side-impact, and front and rear side curtain airbag.
The Elantra Coupe also features a state-of-the-art braking package. The package includes four-wheel disc brakes and an Anti-Lock Braking System (ABS) including Brake Assist, which provides maximum braking force when a panic stop is detected, and Electronic Brake-force Distribution (EBD), to automatically adjust the braking force to front and rear axles based on vehicle loading conditions and driving dynamics. Hyundai Elantra Coupe engineers even looked at something as simple as the parking brake for an integrated rear parking brake caliper for weight reduction.

In terms of passive safety, the Hyundai Elantra Coupe has strong unibody construction, along with front and rear crumple zones to effectively absorb and dissipate impact energy away from cabin occupants.
Read More

Thursday, November 22, 2012

Mitsubishi Outlander Sport, 2013

 
 
 
 

Mitsubishi Outlander Sport, 2013

Mitsubishi Motors North America, Inc. (MMNA) has unveiled an enhanced and improved 2013 Outlander Sport compact crossover utility vehicle (CUV) at the 2012 New York International Auto Show.

Beginning in July 2012, the 2013 Mitsubishi Outlander Sport will be built in the United States at the company's advanced automobile manufacturing facility in America's heartland in Normal, Illinois. The updated, American-made Outlander Sport models produced in the U.S will not only supply Mitsubishi dealers in the states but also be shipped to foreign markets. The 2013 Mitsubishi Outlander Sport will begin shipping to US dealerships in early August 2012 with a starting MSRP of $19,170.

With composed handling, a comfortable ride and roomy seating for 5 adults, this stylish crossover is currently the best-selling car in Mitsubishi Motors' North American model lineup.

The 2013 Outlander Sport features numerous design and feature improvements for the new model year:

Exterior
Front Fascia - Redesigned front bumper section; New grille styling; New fog lamp design.
Rear Bumper - New rear bumper design.
Side Sills - Side sills now black in color to match the lower sections of the redesigned front & rear bumpers.
Handsome 18-in. alloy wheels now standard on all on all trim levels for the 2013 model.

Interior
New interior fabrics; New chrome accent molding for the front doors; New All Wheel Control (AWC) push button switch.

Chassis
Revised rear multi-link suspension for improved handling and ride comfort.

Drivetrain
Enhanced Continuously-Variable Transmission (CVT) calibration for improved acceleration performance and smoother shift feeling.

Exterior Color Availability
New hues White Pearl and Quick Silver join Laguna Blue, Labrador Black Pearl, Mercury Gray and Rally Red.

Fresh Face, Same Exceptional Value
The entire front fascia of the 2013 Mitsubishi Outlander Sport has been completely made over versus last year's model. The signature pronounced, trapezoidal grille opening and recessed fog lamp housings are still present, but now feature a new, more simple and clean shape. Another appealing detail is the new chrome trim surrounding the outer perimeter of the recessed fog lamps.

Likewise, the rear fascia has been refreshed to complement the new look of the front fascia.

The highly-stylized front/rear fascia makeover - along with new black-colored side sills - enrich the Mitsubishi Outlander Sport's already athletic-looking aesthetic demeanor, further separating Mitsubishi's compact crossover from its more mundane peers.

With an impressive EPA fuel mileage rating of 31 highway mpg, and the availability of either front- or all-wheel drive, the stylish 2013 Mitsubishi Outlander Sport is a compelling choice for young families or active individuals that combines the space and versatility of an SUV with the outstanding ride quality and improved fuel economy of an exceptionally engineered car.

Standard equipment on all Mitsubishi Outlander Sport models includes stylish 18-in. alloy wheels; leather-wrapped steering wheel and shift knob; cruise control with steering wheel-mounted controls; Electric Power Steering (EPS); FUSE Handsfree Link System that allows voice-activated operation of an iPod and a cell phone, remote keyless entry; eye-catching rear LED combination tail lamps; heated outside mirrors; steering wheel-mounted audio controls; and air conditioning with micron filter. Among the included safety features are driver knee airbag; Hill Start Assist (HSA); Active Stability Control (ASC); Traction Control Logic (TCL); anti-lock braking system (ABS) with Electronic Brake-force Distribution (EBD) and Brake Assist; and an advanced front air bag SRS with passenger weight and driver's seat position sensors, front seat-mounted side-impact air bags, and curtain side air bags with roll-over sensors.

The top-flight SE version adds further luxuries such as a dynamic 6 speaker premium audio system with SiriusXM satellite radio with 3-months subscription service; heated front seats; one-touch Start/Stop (OSS) engine switch; climate control system with full-auto air conditioning; rain-sensing wipers; super-wide beam xenon head lights and FAST key passive entry system.
Read More