Ford C-MAX Energi, 2013

 

•  Ford C-MAX Energi, 2013

Ford revealed two next-generation hybrid vehicles - including its first production plug-in hybrid electric vehicle - at the 2011 North American International Auto Show, bringing consumers more choice, versatility and style for high-mileage family-friendly vehicles.

Ford C-MAX Energi plug-in hybrid and C-MAX Hybrid are based on the new Ford C-MAX five-passenger multi-activity vehicle, and each will offer high mileage and low emissions as well as distinctive body design and a flexible interior. The plug-in hybrid and third-generation full hybrid leverage Ford's global C-car platform, acclaimed powersplit architecture, next-generation driver information features and advanced lithium-ion battery systems.

Ford C-MAX Hybrid is targeted to deliver better fuel economy than the 41 mpg Ford Fusion Hybrid, the most fuel-efficient sedan in America today. It builds on the success of the critically acclaimed powersplit architecture Ford uses in its current hybrids, allowing it to operate in fuel-saving electric mode beyond 47 mph.

Both the C-MAX Energi and C-MAX Hybrid models will be built alongside the all-new 2012 Ford Focus and Focus Electric at Ford's Michigan Assembly Plant in Wayne, Mich. The plant's production is powered in part by one of the largest solar energy generator systems in the state. The C-MAX Energi and C-MAX Hybrid vehicles sold in Europe in 2013 will be built at Ford's plant in Valencia, Spain, starting in 2013.

The plug-in advantage
Targeted to achieve AT-PZEV (Advanced Technology Partial Zero Emissions Vehicle) status, Ford C-MAX Energi provides maximum fuel efficiency by pairing a high-voltage lithium-ion battery and electric traction motor with a high-efficiency Atkinson-cycle gasoline engine. This allows it to run in electric mode before using the gasoline engine.

Ford C-MAX Energi will offer more than 500 miles (800 kilometers) of overall driving range using the battery and engine - more than any other plug-in or extended-range electric vehicle. C-MAX Energi delivers better charge-sustaining fuel economy than Chevrolet Volt.

In general, plug-in hybrid vehicles offer several benefits, including:

•     Electric driving range, perfect for emissions-free and silent city driving
•     Potential consumer savings on energy and fuel costs thanks to improved fuel efficiency over a standard hybrid
•     Reduced dependency on petroleum and increased energy independence
•     Reduced environmental impact through reductions in greenhouse gas emissions
•     Increased use of electricity from renewable energy sources (e.g. wind and solar), where available, for vehicle recharging

The development of Ford's first-ever production plug-in hybrid leverages more than 200,000 miles of road testing conducted in collaboration with a coalition of 10 utility companies, the U.S. Department of Energy, the New York State Energy Research and Development Administration and the Electric Power Research Institute.

Getting charged up
Ford C-MAX Energi and C-MAX Hybrid will use advanced lithium-ion battery systems developed and assembled in-house by Ford in Michigan. Each system is smartly designed to maximize use of common, high-quality components, such as control board hardware that has proven field performance in Ford's current, critically acclaimed hybrid vehicles.

Li-ion battery packs offer a number of advantages over the nickel-metal-hydride (NiMH) batteries that power today's hybrid vehicles. In general, they are 25 to 30 percent smaller and 50 percent lighter, which makes them easier to package in a vehicle, and can be tuned to increase power to boost acceleration or to increase energy to extend driving distance.

While Ford C-MAX Hybrid will operate much like today's hybrid vehicles, C-MAX Energi will benefit from daily charging to maximize its all-electric range. Thanks to the efficiencies of its right-sized battery system, the plug-in hybrid easily recharges 100 percent overnight on a 120-volt outlet.
A full charge in C-MAX Energi allows owners to increase their driving significantly in all-electric mode and drastically reduce their use of the on-board fuel engine.

On start-up, Ford C-MAX Energi will operate in charge-depletion mode, providing electric driving range. When the battery has been depleted or certain conditions are met, it switches to charge-sustaining hybrid mode for continued optimal fuel efficiency.

Ford worked with a supplier to provide an industry-standard five-point plug for C-MAX Energi (and new Focus Electric) that is ergonomically comfortable to hold as well as durably and distinctively designed. The plug handle uses a matte-finished black rubber for a comfortable, non-slip grip and the plug head is shielded with a glossy white hard plastic to protect the electronics. The Ford Blue Oval trademark helps make the device immediately recognizable.

When the cord set connector is plugged into the vehicle's charge port, which is located conveniently between the driver's door and front wheel well, it activates a light ring that loops around the port twice in acknowledgement of connectivity. The light ring then illuminates in quadrants as the vehicle charges. Flashing quadrants represent charge in progress and solid-lit quadrants show stages of charge completion. When the entire ring is solidly lit, the vehicle is fully charged.

Smarter interface
Ford C-MAX Energi owners will have access to a suite of driver information systems - on-board and off-board - designed to help them manage the recharge process, manage the most eco-friendly route on-board, remotely control their vehicle's charge and preconditioning settings, monitor battery state of charge and maximize energy efficiency to extend use of electric mode. Ford C-MAX Hybrid owners also will benefit from the on-board features.

Among these tools is a unique execution of MyFord Touch™ driver connect technology, especially for electrified driving. It offers exceptional configurability of vehicle information, including fuel level, battery power level, and average and instant miles per gallon.

The cluster's new MyView feature allows drivers to access even more vehicle data such as the electrical demands of vehicle accessories, including air conditioning, which influences fuel economy and the electric driving range of the Ford C-MAX Energi.
The Brake Coach feature helps to educate drivers to optimize their use of the regenerative brakes to recapture kinetic energy and send it back to the battery, also reducing wear on the brakes.

Long-term fuel efficiency can be displayed in two ways - either as a traditional chart or using an innovative display that shows a growing leafy vine on the right side of the cluster. The more efficient a customer is, the more lush and beautiful the leaves and vines become, creating a unique visual reward for the driver's efforts.
To reinforce the message, at the end of each trip a display screen provides distance driven, miles gained through regenerative braking, fuel consumed (average and total) and a regenerative braking score.

New MyFord Mobile
Off-board, Ford C-MAX Energi owners in North America can maintain constant contact with the car anywhere they have mobile phone or web access using the Ford-developed MyFord Mobile.

MyFord Mobile enables access to a secure Ford website and smartphone/feature phone app to get instant vehicle status information, perform key functions remotely, monitor the car's state of charge and current range, get various alerts including when the vehicle requires charging, remotely program charge settings and download vehicle data for analysis.

The feature also allows the owner to program the vehicle to use electricity from the grid to heat or cool the battery and cabin while plugged in. For example, during hot summer months, owners can preprogram the car the evening before to be fully charged - and fully cooled to a particular temperature - by a certain time the following morning. Users can also locate the vehicle with GPS, remotely start the vehicle, and remotely lock and unlock the car doors.

Working with MapQuest, MyFord Mobile can communicate charge station and other points of interest to Ford C-MAX Energi using SYNC's Traffic, Directions and Information (TDI) service. Turn-by-turn guidance is provided by the in-car map-based Navigation System. Drivers can also get up-to-date charging station information in their vehicle directly through SYNC TDI simply by connecting to SYNC Services.

Value charging, powered by Microsoft
Using the value charging feature, powered by Microsoft, Ford C-MAX Energi owners in North America will be able to optimize their home's energy use and vehicle recharging practices. Value charging allows Ford customers to reduce their electricity costs by taking advantage of off-peak or reduced rates from their utility without a complicated set-up process.

Proven powersplit technology
Ford C-MAX Energi and C-MAX Hybrid build on the success of the critically acclaimed powersplit architecture Ford uses in its current hybrids, including the Ford Fusion Hybrid, winner of the 2010 MOTOR TREND Car of the Year® award.

In a powersplit hybrid, the electric motor and gasoline-powered engine can work together or separately to maximize efficiency. The engine also can operate independently of vehicle speed, charging the batteries or providing power to the wheels as needed. The motor alone can provide sufficient power to the wheels in low-speed, low-load conditions, and work with the engine at higher speeds.

While this system enables the current Fusion Hybrid to operate in fuel-saving electric mode up to 47 mph, Ford is targeting higher electric operating speeds for Ford C-MAX Hybrid and even more capability for C-MAX Energi, which  have the advantage of additional battery power.

Ford's global C-car strategy
C-MAX Energi and C-MAX Hybrid are two of at least 10 new models or derivatives that Ford will launch around the world based on its new global C-car platform - Ford's first truly global One Ford platform.

Ford's new generation of C-segment vehicles will be sold in more than 120 markets and will account for more than 2 million units annually. The C-segment accounts for one in four cars sold worldwide today and, in conjunction with the B-segment, is expected to rise to 50 percent of all cars sold globally by 2013.

The all-new C-MAX lineup also introduces a number of advanced new technologies to the compact multi-activity vehicle class. More often found only on larger or more premium cars, these technologies are focused on enhanced comfort, safety and sustainability, including the availability of new and powerful, yet highly fuel-efficient, low-CO2 Ford EcoBoost gas engines.

The previous European C-MAX established a reputation for providing a balance of enjoyable driving dynamics and impressive comfort. The all-new model is set to take that performance to a new level, giving drivers a class-leading combination of responsive, sporty handling and overall refinement approaching the standards usually associated with larger, luxury vehicles.

Ford C-MAX Energi and C-MAX Hybrid are two of five electrified vehicles that Ford will bring to the North American market during the next two years. In addition, the Ford Transit Connect Electric small commercial van, built in collaboration with Azure Dynamics, began initial production at the end of 2010, and Focus Electric will launch in late 2011. A second next-generation hybrid electric vehicle will be announced later and available in North America and Europe in 2012.

Read More

Mercedes-Benz C-Class, 2012

 

 

 

 

 

 

•  Mercedes-Benz C-Class, 2012

The new Mercedes-Benz C-Class launched in spring 2011 and is a comprehensive modernisation. The front and rear sections of this best selling model have a more striking design. There is now a high-resolution colour display screen in the instrument cluster, an elegant new dashboard with grained surface and prominent decorative trim emphasising the premium character of the interior. Fuel consumption has been improved by up to 31 per cent. Efficiency-enhancing measures including new engines, the improved 7G-TRONIC PLUS automatic transmission and the ECO start/stop function also feature. Ten new driving assistance systems ranging from the standard ATTENTION ASSIST drowsiness detection system to the optional DISTRONIC PLUS proximity control system are also now available for this model series for the first time.

A total of more than 2,000 new components distinguish the latest generation of the Mercedes-Benz C-Class from its predecessor. Both the Saloon and Estate versions can be ordered from 10 January 2011. The European market launch will take place from March 2011. In addition to the standard appointments - which now include a leather steering wheel - the two design and equipment lines ELEGANCE and AVANTGARDE are the basis for the individualisation programme of the C-Class. The two lines are now even more readily distinguishable from each other.

The Mercedes-Benz C-Class is the highest-selling model series for Mercedes-Benz. The current series has found well over one million buyers worldwide since its launch in March 2007. Since the introduction of the first Mercedes-Benz C-Class in 1982 (then known as the model 190), Mercedes-Benz has sold more than 8.5 million vehicles in total in this segment. In 2010 too, the C-Class has repeatedly won top places in the registration statistics.

More power, lower consumption: the engines
An improvement of up to 31 per cent has been achieved in fuel consumption and all Mercedes-Benz C-Class launch models will feature the ECO start/stop function as standard. All the engine variants are now classed as BlueEFFICIENCY units, showing that they are particularly efficient and environmentally compatible in their use of fuel. In future all automatic versions will feature the further-developed 7G-TRONIC PLUS seven-speed automatic transmission. In addition, the overall ratio of all new powertrain variants has been optimised for better fuel economy.

All the petrol engines in the model series have direct injection. One of the highlights is the introduction of the new V6 petrol engine with its innovative and highly efficient BlueDIRECT process in the C 350 BlueEFFICIENCY. The quantum leap in efficiency is particularly well illustrated by the six-cylinder unit: Power has increased considerably, the C 350 BlueEFFICIENCY delivering 306 hp and 370 Nm (previously 292 hp and 365 Nm).

The four-cylinder petrol engines, which made a great evolutionary leap forward in 2009 and all feature direct injection and turbocharging and excel with high performance and exemplary economy.

The most economical model in the Mercedes C-Class range has also become even more frugal: the C 220 CDI BlueEFFICIENCY with the manual six-speed transmission and the standard ECO start/stop function. The corresponds to 117 grams of CO2 per kilometre. In conjunction with the improved 7G-TRONIC PLUS automatic transmission and the ECO start/stop function included as standard, the C 220 CDI BlueEFFICIENCY and C 250 CDI BlueEFFICIENCY both deliver top-class figures with a combined diesel consumption of 58.8 mpg. This corresponds to CO2 emissions of 125 grams per kilometre.

Design: Dynamic, resolute, self-assured
The Mercedes-Benz C-Class greets spring 2011 having undergone a comprehensive makeover. The front and tail-end section of the million-seller are styled more strikingly, the front being brought closer to the brand's new design idiom. The front bumper has a more expressive and dynamic contour, and supports the shape of the radiator grille more prominently as the central element at the front.

The central air intake opens out upwards in a V-shape, forming a visual base unit for the radiator grille. Pronounced side sections extend from the sporty V-shape at the centre. Continuing beneath the headlamps, these sections blend into the feature lines along the vehicle flanks, forming a link with the sides. The side air inlets in the bumper are positioned low down, giving the car a more road-hugging appearance.

Both the saloon and the estate have been given a new bonnet made of aluminium. Its contour in the area around the headlamps and the radiator grille emphasises the V-shape of the front end to a greater extent than previously.

The shape of the clear-lens headlamps has been modified to create a more dynamic and resolute impression, and to act together with the bonnet, radiator grille and bumper to give the Mercedes-Benz C-Class a new face. This impression is reinforced by both the exterior form of the headlamps and the interior of the housings. The headlamps show their modernity by precision and an interplay between matt and high-gloss areas. The halogen headlamps are arranged in the classic way, with low beam on the outside, main beam on the inside and the indicators neatly arranged in the outer corner formed with the front wing.

If the optional bi-xenon headlamps with the Intelligent Light System (ILS) are ordered, the impression of depth is reinforced by a row of lighting modules. A position light with a distinctive C-shape emphasises the night design. Behind it is a cornering light extending to the main headlamp module on the outside. A visual base in the lower section of the headlamp is formed by a horizontal broadband LED indicator unit. The horizontal LED daytime running lamps in the bumper also make the Mercedes-Benz C-Class unmistakable from a distance.

In the case of the rear bumper, the light-catching contours and dividing lines have been modified to emphasise the width of the saloon and estate even more strongly. This change is particularly obvious in the more steeply rising course of the side light-catching contours towards the tail lights. A continuous light-catching contour at the upper end of the rear bumper extends into the flanks to connect the tail end with the sides to emphasise the sporty character of the rear aspect.

In the facelifted model, the tail lights are even more neatly integrated into the tail end by a continuous covering lens. The characteristic surface meander is now on the inside of the light, and reminiscent of preceding model series. The particular impression of depth is achieved by a centrally located LED indicator, which appears to float in front of the red upper and lower light bands.

In all its finery: restyled dashboard and high-grade surfaces
One of the design work's main points of focus in the interior was on restyling the dashboard with the aim of creating a sporty, high-quality look. At the same time the trim concept was also enhanced. The touch surfaces of the controls are more finely detailed and galvanised. With its stepped extension, the instrument cluster's panel now also accommodates the central display. The instrument cluster and a discreet light-catching contour continue to the front-passenger side. The central, trapezoidal air vents and the round vents on the outside are highlighted in detail by galvanised trim.

The large section of trim is an important part of the newly designed dashboard. This extends from the centre air vents across the front-passenger side to the outer air vent and creates a much wider look for the interior. The upper part of the dashboard with its new surface grain continues into the beltlines of the door panels.

The control panel of the new-generation communication and information unit has keys with high-gloss surface inserts. The combination of matt keys, high-gloss areas and a new knurled wheel design accentuates the higher perceived value of the interior. Together with the new telematics generation, the facelifted Mercedes-Benz C-Class also comes complete with a new instrument cluster with an integral display. Directed towards the driver are three tube-style surrounds with a galvanised surface, openly demonstrating the C-Class's sporting ambitions.

The premium character of the interior is underlined by the new-generation steering wheel, which was introduced with the new CLS and is now available in the sporty AVANTGARDE line for the Mercedes-Benz C-Class. The steering wheel with its chromed central spoke stylishly accentuates the sporty atmosphere in the C-Class.

Interior: Higher quality and more comfortable
Brimming with a wealth of high-grade details in the interior, all reminiscent of the new CLS, the Mercedes-Benz C-Class sets new benchmarks in its segment when it comes to quality and comfort. The interior designers have paid painstaking attention to restyling the dashboard, whose new features include its surface grain, the integral screen, prominent trim and, as an option, a high-resolution colour display in the instrument cluster. A nappa leather steering wheel comes as part of the standard specification. Time spent in both the saloon and the estate is now even more pleasant, thanks to the C-Class's tried-and-tested dimensional concept, along with its new comfort-enhancing equipment and appointments such as climatised seats and the luxury automatic climate control THERMOTRONIC, which now makes it possible for the occupants to select their own individual climate styles.

Generous: the interior dimensions and load capacity
The Mercedes-Benz C-Class is amongst the most spacious vehicles in its segment. The front shoulder room and the elbow width amount to 1390 and 1440 millimetres respectively. In the rear, the saloon and estate offer shoulder room of 1398 millimetres and an elbow width of 1462 millimetres.

And the Mercedes-Benz C-Class offers plenty of space for luggage, too: the saloon's load capacity is 475 litres (in accordance with the VDA measuring method). For the saloon Mercedes-Benz offers a divided backrest which can be quickly and easily folded forward on a 1:2 ratio. The head restraints move forward together with the backrests and do not need to be removed first.

Variability is the name of the game where the estate is concerned; its rear seat backrests are divided on a 1/3 to 2/3 ratio and can be folded forwards. The luggage compartment capacity can be extended from 485 or 690 litres when the vehicle is loaded to roof height up to 1500 litres (when the rear seat backrests are folded forward and the vehicle is loaded to roof height). And there is yet another peak value to note: the maximum usable interior length - from the tailgate to the front passenger's footwell - is 2.82 metres.

Thanks to a host of practical details, the Mercedes estate can be loaded easily, conveniently and safely. For instance, two bag hooks and four eyelets for anchoring loads are included in the load compartment as standard. Stowage compartments with net covers and a collapsible shopping crate are also part of the standard specification, as are the combined luggage cover and retaining net. The EASY-PACK tailgate opens and closes at the push of a button. Finally, the optional EASY-PACK load-securing kit presents drivers with even more possibilities for securing the load being carried.

Comfort on long journeys as standard: the front seats
The seats in the Mercedes-Benz C-Class make a valuable contribution to comfort on long journeys. As an optional extra, climatised seats are now available for the driver and front passenger. They ensure a high degree of thermal seating comfort thanks to small electric fans in the upholstery of the cushion and in the backrest which draw in ambient air, then push it through the perforated seat cover up to the surface. As well as this ventilation feature the climatised seats also include seat heating.

The height and backrest angle of the front seats can be electrically adjusted. Even more ease of operation is available as an optional extra in the form of fully electric adjustment of the driver's and front-passenger seat. In conjunction with the Memory package three settings can be stored.

The multicontour seat (available as an optional extra) has separately controllable air chambers under the upholstery material. They make it possible for the occupants to adapt the shape of the seat precisely to suit their anatomy or their preferences. This is all thanks to inflatable air chambers underneath the upholstery material which enable the contouring of the side bolsters to be individually set. Another attribute is the function for pneumatically adjusting the seat cushion length. At the push of a button the seat cushion length can be extended, allowing occupants to relax their legs and ensuring good blood circulation.

Comfortable and safe: the rear seats
The rear seat unit is of one-piece construction. Three head restraints and three inertia-reel seat belts ensure the safety of the occupants. The outer rear seats are also equipped with belt tensioners and belt force limiters, as well as head restraints adjustable for height and angle. ISOFIX, the standardised attachment system for child seats, is included as part of the standard specification.

Even more comfort: THERMOTRONIC now with climate modes
As part of the standard specification, all Mercedes-Benz C-Class models include the two-zone THERMATIC automatic climate control. Yet more climate comfort is available courtesy of the optional luxury automatic climate control THERMOTRONIC, which allows individual temperature settings for three zones - for the driver, the front passenger and the rear passengers. What are known as the THERMOTRONIC's climate modes constitute a new feature in the C-Class: the car occupants can select "Diffuse", "Medium" or "Focus" settings at the push of a button and thus adjust the air quantity and air distribution to their liking without having to leave the convenient automatic mode.

In "Diffuse" mode, for example, the THERMOTRONIC system operates with a low air speed and distributes the air over a wide area so that there are fewer draughts. In "Focus" mode, meanwhile, the air outlets in the centre area of the dashboard are used for the most part, meeting the need for a direct flow of a larger quantity of air.

More operating comfort, better connectivity: new-generation telematics
The new Mercedes-Benz C-Class also sees the debut of a new telematics generation which will also be gradually introduced in other model series. Major new features include greater operating convenience, larger displays, telephone directory transfer, display of SMS messages, wireless music reproduction via Bluetooth and a USB interface now accommodated in the centre armrest.

The multimedia system COMAND Online now provides internet access for the first time (via the customers data enabled mobile phone). When the car is stationary, customers are able to browse freely or surf to a Mercedes-Benz Online service whose pages load particularly rapidly and are also easy to use while on the move. The integrated services include weather information and a special destination search via Google, as well as the option of downloading a route that has been previously configured on a PC using Google Maps and sent to the car. The navigation system of COMAND Online also has added functions.

Also new: routes covered can be recorded and repeated later, specific personal destinations can be imported via an SD card and four alternative routes can be displayed on the navigation map, one of them a particularly economical variation.

As a first in the Mercedes-Benz C-Class, the Becker® MAP PILOT makes a low-cost navigation function, which can also be retrofitted, available for the entry-level Audio 20 CD radio. Its advantages over aftermarket solutions include integrated operation via the central controls and the Audio 20 display, a concealed location in the glove compartment and updating via an internet portal.

Chassis and suspension: Agile handling and high comfort
The AGILITY CONTROL suspension, which is standard equipment in both the C-Class Saloon and Estate, harmonises perfectly with the dynamic design. It is based on an amplitude-dependent damping system: when driving normally with low shock absorber stimulus, the damping forces are automatically reduced for a noticeable improvement in ride comfort - but without any compromise in handling safety. When shock absorber stimuli are of greater magnitude, for example when cornering at speed or taking evasive action, the maximum damping forces are set and the car is stabilised effectively.

The Mercedes-Benz C-Class's AGILITY CONTROL suspension is complemented by a rack-and-pinion steering system. Positioning the steering gear 80 millimetres in front of the wheel centre makes for predictable self-steering characteristics with a slight tendency to understeer. Speed-sensitive steering with variable steering-wheel support and a variable steering ratio is available as an optional extra.

Precise wheel location: the front axle with McPherson struts
At the front axle a three-link construction with McPherson struts is used. The lower link level consists of two separate elements which act as torque and cross struts and which are both forged from aluminium. In addition to more precise wheel location, this construction has the particular advantage of compensating vibrations caused by tyre imbalances or fluctuating brake forces better than rigid wishbones.

The third component in the three-link system is the track rod, which connects the transversely installed steering gear with the wheels. The reinforced stabiliser is linked to the spring strut, which is also actively involved in front wheel location.

The struts consist of cylindrical, lateral force compensated coil springs, twin-tube shock absorbers and newly developed three-phase head bearings. If severe body roll occurs, the stabiliser is supported by rebound buffer springs to ensure agile handling accompanied by a high level of comfort.

Controlled compression and rebound: the multi-link independent suspension
The series-production launch of the Mercedes-Benz 190 in 1983 also marked the beginning of the multi-link independent suspension's career. In many respects this is a feature that remains without parallel to this day, which is why this patented axle principle - naturally in a modified form - is also employed in the C-Class. With the multi-link independent suspension the wheel is fixed to five elastically mounted links that are independent of each other and which restrict its scope for movement in five directions:

•     The lower transverse control arms activate the suspension springs and dampers
•     The upper transverse control arms regulate the camber over the spring travel
•     The torque struts take up the drive and braking forces, and compensate for dive and squat when accelerating and decelerating
•     The diagonal struts are arranged differently from the torque struts, and also help to prevent dive and squat when braking and accelerating
•     The track rods limit changes in the wheel's toe-in to a desirable minimum

Owing to this intelligent control arm construction, each rear wheel basically retains freedom of movement in one plane only: namely during controlled compression and rebound.

Even more agile: sports suspension and Dynamic Handling package as an option

In addition to the standard-specification AGILITY CONTROL suspension, the C-Class offers two other options for adjusting the suspension's characteristics in line with drivers' personal preferences. As an optional extra a sports suspension can be selected - it has shorter springs, shock absorbers with tauter tuning, and stronger torsion bars.

A Dynamic Handling package is available as an alternative. It offers the driver two shift programs to choose from: Sport and Comfort. Within these shift programs the shock absorbers are electrically adjusted on a continuously variable basis. Sensors monitor each driving situation and send the information they gather to an electronic control unit. Depending on the current road or operating condition the system adapts the damping forces individually for each wheel - with infinite adjustment and fully automatically.

New styling: light-alloy wheels for AVANTGARDE and ELEGANCE
The saloon and estate both sport seven-spoke light-alloy wheels as part of their standard specification, whilst the AVANTGARDE and ELEGANCE lines are shod in newly styled twin-spoke wheels. Individuality comes courtesy of the extensive range of light-alloy wheels featuring around a dozen different designs in 16, 17 and 18 format. In place of the standard-fit 7.5 J x 17 wheel, the AVANTGARDE model can also be ordered with a 7 J x 16 wheel - providing an alternative for customers who want to make use of the consumption potential offered by a smaller and narrower wheel/tyre combination.

Electronic helpers: the new assistance systems in the Mercedes-Benz C-Class
Adaptive Highbeam Assist. When vehicles are detected ahead of or approaching the vehicle, this system automatically dips the beams and adjusts the range of the headlamps appropriate to the distance. This means that main beam can be used more frequently.

Active Lane Keeping Assist. The system kicks into action if the Mercedes-Benz vehicle inadvertently drifts over a solid line to the right or left of a lane. In such a case, a warning sign in the instrument cluster and vibration of the steering wheel give the driver warning. If the driver does not heed the warning in the case of the solid line, Active Lane Keeping Assist can use the ESP® to brake the opposite wheels and thereby prevent the vehicle from crossing the solid line. The Lane Keeping Assist, which warns but does not actively intervene, is available as a favourably-priced alternative.

Active Blind Spot Assist. It warns the driver when changing lanes if a risk of collision is detected due to another vehicle in the neighbouring lane being in the blind spot of the exterior mirror. If the driver ignores the warning and nevertheless initiates the lane-changing manoeuvre, the Active Blind Spot Assist intervenes. By applying braking force to the wheels on the opposite side of the vehicle, a yaw movement is created which counteracts the collision course. The Active Blind Spot Assist was recently awarded the "Yellow Angel" prize for being a pioneering innovation by a jury of experts from the ADAC, the German automobile association and the biggest of its kind in the world. The favourably-priced alternative is the Blind Spot Assist; it warns the driver but does not actively intervene.

ATTENTION ASSISTwarns drivers when it detects that they are over-tired. Studies have shown that around a quarter of all serious motorway accidents are caused by drowsy drivers, making this factor an even bigger cause of accidents than drink-driving. With ATTENTION ASSIST (standard for Elegance and Avantgarde), Mercedes-Benz is therefore making another important contribution towards helping to avoid accidents: it employs high-resolution sensors to observe driver behaviour and can recognise whether the driver is tired or not paying attention, based primarily on steering wheel movements.

BRAKE ASSIST PLUS: this system is able to recognise an impending rear-end collision using radar sensors. It calculates the necessary degree of braking assistance and makes it available immediately when the driver presses the brake pedal.

DISTRONIC PLUS: the radar-based proximity control supports the driver at speeds between zero and 200 km/h by automatically adjusting the distance to the vehicles in front. In doing so it is able to apply the brakes to bring the vehicle to a complete standstill and also accelerate it again. As a result, the system is also particularly convenient in stop-and-go traffic. If the system detects that the distance is being reduced too quickly, it warns the driver with both visual and acoustic signals. The control system has also been refined even further through the inclusion of information from digital maps.

Speed Limit Assist: a camera fitted behind the windscreen detects speed limit signs at the roadside and compares this data to information contained in the GPS system. The relevant speed limit is then displayed in the instrument cluster.

PARKTRONIC including Parking Guidance:ultrasonic sensors measure the length of parking spaces as the car drives past; the cockpit display provides a schematic representation of the recommended parking manoeuvre. Ultrasonic sensors then support the driver whilst parking.

PRE-SAFE Brake:autonomous braking if acute danger of an accident is detected. At first the driver is given both an acoustic and an optical warning if the system identifies that there is a danger of collision. If the driver does not react to this, the system brakes the vehicle autonomously. This occurs in two stages: around 1.6 seconds before the calculated impact point the system decelerates the car with around 40 percent (approx. four m/s²) of the maximum braking power, gives the driver an additional, haptic warning of the impending impact and as a precaution activates the reversible PRE-SAFE occupant protection systems. If the driver still fails to react, the PRE-SAFE Brake activates the maximum braking power around 0.6 seconds before the now unavoidable collision - this emergency braking can greatly reduce the severity of the impact. The system therefore acts like an "electronic crumple zone", offering the car occupants even greater protection. The PRE-SAFE Brake is active at speeds of between 30 and 200 km/h when moving vehicles are detected in front of the car. The system also reacts if the car approaches a stationary queue of traffic, providing its speed is below 70 km/h.

Read More

BMW 6-Series Convertible, 2012

 

 

 

 

 

 

•  BMW 6-Series Convertible, 2012

Words such as "breathtaking", "irresistible" and "flawless" epper the history of BMW convertibles. And now the brand has added a new chapter to a tradition of open-top cars that stretches back decades. The new BMW 6-Series Convertible fulfils the wishes of discerning automotive aesthetes with its finely honed sense for sporty driving pleasure, groundbreaking luxury and sparkling looks. In the exclusive environs of the premium convertible market, the 2+2-seater makes a convincing case for itself with the most efficient engines, most advanced chassis technology and most innovative comfort, infotainment and safety features in its segment.

A sweeping bonnet, set-back passenger compartment, long wheelbase and flat waistline embody the hallmark proportions of a BMW convertible. The new BMW 6-Series Convertible combines these features with a classic soft-top roof in customary "fin" design. Powerfully contoured surfaces and the surging dynamism of its lines promise assured driving properties. The luxurious ambience of the interior is highlighted by the driver-oriented cockpit set-up and wraps the front passenger and rear passengers in a feeling of exclusive security. Nowhere is the high-class functionality of the interior underlined more prominently than in the redesigned freestanding Control Display of the standard-fitted iDrive control system.

The new BMW 6-Series Convertible is available with two engine variants from launch. The eight-cylinder powerplant in the BMW 650i Convertible produces 300 kW/407 hp, while an exclusive variant of the six-cylinder in-line engine with BMW TwinPower Turbo, direct injection and VALVETRONIC -generating 235 kW/320 hp - has been developed for the BMW 640i Convertible. Both engines team up as standard with an eight-speed Sports automatic gearbox. Standard-fitted BMW EfficientDynamics features include the Auto Start-Stop function in the BMW 640i Convertible.

Chassis technology unmatched in its segment works in tandem with the cutting-edge engines to ensure even greater dynamic capability and a similarly discernible improvement in ride comfort compared to its predecessor. The new BMW 6-Series Convertible comes as standard with Drive Dynamic Control, which allows drivers to choose their own suspension settings, while the Adaptive Drive system is available as an option with electrically controlled dampers and roll stabilisation. In addition to the standard-fitted electromechanical power steering, another unique feature in this segment is the optional Integral Active Steering system.

The new BMW 6-Series Convertible also underlines its progressive character with numerous BMW ConnectedDrive features that none of its rivals can match. The selection of optional driver assistance systems includes a rear-view camera, Surround View, BMW Night Vision with pedestrian recognition and BMW Parking Assistant. The new BMW 6-Series Convertible is the only car in its segment to be available with a Head-Up Display. Making its debut in the new soft top, the latest generation of the system uses a broader palette of colours to create an even more detailed and sharper image.

The design: athletic elegance, natural sportiness and sparkling looks.
The luxurious yet dynamic driving experience of the new BMW 6-Series Convertible is reflected in the athletic elegance and sense-tingling sportiness of its exterior design. A long, sweeping bonnet, set-back passenger compartment, long wheelbase and flat waistline combine to create the proportions typical of a BMW convertible. The precise interplay of eye-catching lines and meticulously sculpted surfaces help to give the new BMW 6-Series Convertible its arresting looks.

Like the lines projecting out from the nose of the car and continuing along its full length, the harmoniously curved surfaces of the body take their cue from the movement of waves sent out by a the bow of a motor boat piercing the water. Continuing the theme, the waistline surface which leads the body into the interior mimics the character of a boat deck.

The front end: surging forward and focusing on the road.
The new BMW 6-Series Convertible also displays its dynamic character in its front end design. The large, slightly forward-slanting BMW kidney grille - its "shark nose" - gives the car a sense of surging forward, while a broad air intake, strikingly contoured bonnet and muscular wheel arches hint at its powerful engine technology and impressive roadholding. High-quality chrome elements positioned on the outer edges of the front apron further accentuate the width of the car. The optional foglamps consisting of a string of three LED units are placed in front of these chrome elements.

The standard xenon headlights of the new BMW 6-Series Convertible pick up on the brand's familiar "twin round" look. As standard, an accent strip cuts across the top of them; this is replaced by an LED accent light if the optional Adaptive Headlights are specified. The daytime running lights take the form of LED light rings, whose bright white light illuminates the distinctive front end look. A horizontal light strip below the daytime running lights, meanwhile, performs direction indicator duties.

Side view: elongated lines, athletic curves.
Uninterrupted, flowing lines lend the silhouette of the BMW 6-Series Convertible a sweeping elegance. Powerful curves mimicking the natural movement of waves give the car's side view a natural athleticism. The hallmark BMW swage line at door handle level is spawned in the front wheel arch gill - which houses the side indicator - and extends all the way back into the rear lights.

Another character line is released from the bulge of the front wing, stretching powerfully over the front wheel like a wave before dropping down and continuing horizontally towards the rear. Together with the swage line, it creates a dynamic wedge shape which emphasises the car's forward-surging character.

The striking V-shape and accentuated width of the rear end create a powerful appearance.
Wide and flat surfaces define the rear of the new BMW 6-Series Convertible. The dominance of horizontal lines adds extra emphasis to the wider track of the new car compared to its predecessor. In addition, downward-converging lines underline the car's focus on the road, echoing the approach at the front end. This distinctive V-shape is created by lines including the side edges of the boot lid, the licence plate surround and the contours of the reflectors positioned in the bumper. The slightly concave lower section of the boot lid produces light and shade effects which lend an extra lightness to the rear of the car.

The two-part rear light clusters give the brand's familiar L-shape a particularly sporty, dynamic edge. Inside the units, two LED-powered light strips create the familiar BMW night-time look. The indicators and brake lights are also LED units.

The interior: seats for four - and each one made to measure.
The new BMW 6-Series Convertible is designed to be a 2+2-seater. Its interior offers individually tailored seats for the driver, front passenger and rear passengers. High-quality materials, carefully coordinated colours and, once again, meticulously formed surfaces combine to produce an ambience defined by luxury, sweeping dynamism and stylish functionality. A hallmark BMW element of the interior design is the driver-oriented cockpit layout. The central section of the instrument panel, containing the iDrive system's Control Display, the central air vents and the controls for the audio system and air conditioning, are all angled slightly towards the driver. Added to which, the gearshift lever and the buttons for the parking brake, roof operation and Drive Dynamic Control are located on a surface that opens out towards the driver and is set lower than the front passenger side of the centre console.

The front passenger area is bordered by a surface curving elegantly from the armrest over the side edge of the centre console, upwards and outwards into the instrument panel and then horizontally into the door trim. This provides a harmonious surround for the front passenger area, creating a feeling of exclusive security. The contour of the rear waistline surface, which extends slightly into the interior between the head restraints, highlights the individual seat layout of the rear.

Premiere: freestanding Control Display with flatscreen design.
The black-panel instrument cluster of the new BMW 6-Series Convertible combines the traditional sports car circular instruments with state-of-the-art display technology. The navigation system, telephone and entertainment functions are operated using the standard-fitted iDrive control system, whose Control Display boasts an innovative design. The on-board monitor takes the form of a freestanding display for the first time in the new BMW 6-Series Convertible. The standard 7-inch screen can be upgraded to 10.2 inches by ordering the optional Navigation system Professional, and the larger screen has a high-quality galvanised chrome surround. The minimal depth of the display gives it the character of a flatscreen unit. The new arrangement of the Control Display - which now reaches further into the passenger compartment - also influences the architecture of the instrument panel, which rises up steeply in front of the driver and front passenger in the style of a powerboat cockpit

This impression is further enhanced by the structure of the door trim panels. Their surfaces have a powerfully taut look and, like the black waistline surface, pull in and rise up to create a smooth transition into the instrument panel, giving the interior the effect of wrapping around the driver and front passenger.

Exclusive and distinctive: the fin roof.
The new BMW 6-Series Convertible again comes with an electrically powered soft-top roof with "fin" architecture. The multi-layer roof - which has been optimised once again in terms of its acoustic properties and structural rigidity - offers outstanding thermal insulation and thus enables the new convertible to be used comfortably all year round. The fins project out along the flanks of the 6-Series into its rear section, accentuating the car's gracefully sweeping silhouette even more keenly than on its predecessor and giving it an unmistakable appearance. The upshot is that the transition of the roofline into the rear end flows as smoothly as on a hard-top coupé. The upright, heated, glass rear window is positioned directly behind the rear seats and can be lowered separately from the roof.

The automatic opening and closing operation for the roof is activated as standard using a button on the centre console. The Comfort Access option allows the process to be initiated using the remote control button on the car key. Opening the roof takes 19 seconds, the closing process 24 seconds. Both operations can be activated while on the move at speeds of up to 40 km/h (25 mph).

The fin roof of the new BMW 6-Series Convertible is available in three colour variants, including new Anthracite Silver effect, which adds a stylish lustre. Two non-metallic exterior paint finishes and seven metallic shades are available. As an alternative to the standard Dakota leather trim, customers can also specify the Exclusive Nappa leather variant which can be ordered in four colour options. As well as the instrument panel, the centre console and the upper sections of the rear door panel and side trim can also be lined with Exclusive Nappa leather as an option. Plus, interior elements covered with Exclusive Nappa leather can also be ordered with optional stitching in a contrasting colour. The double stitching stands out from the leather surface, lending a particularly elegant flourish to the design of the interior.

Optimised seat comfort; boot capacity can be expanded as required.
At 4,894 millimetres (192.6 in.) in length, the new BMW 6-Series Convertible is 74 millimetres (2.9 in.) longer than its predecessor. Its similarly extended wheelbase now stretches to 2,855 millimetres (112.4 in.). The car has also grown by 39 millimetres (1.5 in.) in width, and now measures 1,894 millimetres (74.5 in.) across, while 9 millimetres (0.35 in.) have been shaved off its height (now 1,365 mm / 53.7 in.). These dimensions not only create a significantly more powerful and, at the same time, elegantly sweeping overall impression, they also take interior spaciousness to new levels. Despite its lower height, the new BMW 6-Series Convertible offers greater headroom in both the front and the rear. Added to which, the height adjustment of the driver and front passenger seats cover a greater range. The increase in the width of the interior is noticeable from all four seats, and passengers in the rear seats also benefit from additional legroom. The tilt angle of the rear seat backrest has seen further optimisation over the predecessor model and now achieves virtually the same angle as you will find in BMW saloons.

A ski bag with an opening in the rear seat backrest is available as an option and offers space for two sets of skis. The new BMW 6-Series Convertible boasts 300 litres (10.6 cu. ft.) of boot space with the roof open, allowing two 46-inch golfbags and a business case to be accommodated. With the roof closed, the variable soft-top stowage compartment can be folded up in a single movement to increase boot capacity to 350 litres (12.3 cu. ft.).

Newly developed lightweight seats, comprehensive safety equipment.
The new BMW 6-Series Convertible is fitted with newly developed lightweight seats with an integrated seatbelt system, and the seats are available in three variants. As an alternative to the standard items, customers can also order sports seats with integral head restraints or comfort seats with a wider range of adjustment. All seat variants come with crash-activated head restraints.

The range of standard safety equipment also includes front airbags, head-thorax side airbags integrated into the seat frame, three-point automatic belts for all seats, belt force limiters and front belt tensioners, ISOFIX child seat mounts in the rear and a roll-over protection system. The roll-over system further developed specifically for the new BMW 6-Series Convertible consists of two bars placed behind the rear head restraints. As soon as the central safety electronics register a danger of the car rolling over, the pyrotechnic release mechanism is activated, at which point the high-strength aluminium bars rise up from their rest position in a fraction of a second.

Carefully targeted advances in the use of materials and in the development of the car's load-bearing structure have significantly enhanced the body's construction in terms of the agility and safety it offers. Its static torsional rigidity is now around 50 per cent greater than that of its predecessor. In the interests of weight optimisation, the doors, bonnet and front axle spring mounts are all aluminium, while the front side panels, roof lid and boot are made from glass fibre composite.

Majestic power: eight- and six-cylinder engines with BMW TwinPower Turbo.
Instantaneous power development and majestic torque are the stand-out features of the two engines available for the new BMW 6-Series Convertible from launch. The V8 powerplant and six-cylinder in-line unit both have BMW TwinPower Turbo technology and direct injection, and combine their sporting character with outstanding smoothness and exceptional efficiency.

The 4.4-litre eight-cylinder engine in the new BMW 650i Convertible develops a maximum 300 kW/407 hp between 5,500 and 6,400 rpm, and puts its peak torque of 600 Newton metres (443 lb-ft) on tap between 1,750 and 4,500 rpm. This unique engine, whose turbochargers are positioned in the V-shaped area between the cylinder banks, produces an instantaneous and sustained wave of power, making it a feast for the enthusiast driver. The new BMW 650i Convertible completes the sprint from 0 to 100 km/h (62 mph) in 5.0 seconds, and the engine electronics eventually step in to halt acceleration at 250 km/h (155 mph). This range-topping engine also boasts extraordinary efficiency for a model in its output class, as average fuel consumption of 10.7 litres per 100 kilometres in the EU test cycle (26.4 mpg imp) and CO2 emissions of 249 grams per kilometre clearly show.

The six-cylinder in-line engine under the bonnet of the new BMW 640i Convertible complements its BMW TwinPower Turbo technology and petrol direct injection with VALVETRONIC fully variable valve control. All of which enables the 3.0-litre unit to develop a maximum 235 kW/320 hp at 5,800 rpm and maximum torque of 450 Newton metres (332 lb-ft) between 1,300 and 4,500 rpm. This engine propels the BMW 640i Convertible from 0 to 100 km/h (62 mph) in 5.7 seconds and on to an electronically limited top speed of 250 km/h (155 mph). Its average fuel economy in the EU test cycle comes in at 7.9 litres per 100 kilometres (35.8 mpg imp), while CO2 emissions are 185 grams per kilometre.

Eight-speed Sports automatic and BMW EfficientDynamics as standard.
The eight-speed Sports automatic gearbox fitted as standard in the new BMW 6-Series Convertible boasts a combination of sportiness, shift comfort and efficiency unmatched in its segment. Its minimal converter slip and rapid and precise gear changes set it apart from the crowd. An innovative gear set configuration allows this transmission to offer eight gears and a correspondingly wide gear range - which optimises the car's sprinting power yet also allows the driver to save fuel by driving at low revs - despite its compact construction and low weight. The driver can also change gear manually using shift paddles on the steering wheel.

In addition to the efficiency of the engines and eight-speed Sports automatic, an extensive range of BMW EfficientDynamics measures also contribute to reducing fuel consumption and emissions. Technology such as Brake Energy Regeneration, Electric Power Steering (EPS), the need-based operation of ancillary components, intelligent lightweight construction and low-rolling-resistance tyres ensure maximum efficiency. Plus, the new BMW 640i Convertible is also equipped with automatic active air flap control and the Auto Start-Stop function. When the driver draws to a standstill at junctions or in a traffic jam the engine is automatically switched off. As soon as the driver releases the brake pedal, the engine starts up again. If the driver is using the Auto Hold function, the engine is restarted when the accelerator is depressed.

Advanced chassis technology including Electric Power Steering; Integral Active Steering available as an option.
Cutting-edge chassis technology gives the new BMW 6-Series Convertible the tools it needs to lay on sporty handling characteristics and exceptional comfort. Both the double wishbone front axle and the integral rear axle are made predominantly from aluminium. The chassis set-up is geared to the requirements of drivers with sporting intentions, although the dampers also respond sensitively to bumps in the road surface under high lateral acceleration. The optional Adaptive Drive system, which includes Dynamic Damper Control and the Dynamic Drive active roll stabilisation system, offers the driver even more precise responses. The electronically controlled dampers adapt to both the nature of the road surface and the driver's style to prevent unwanted movements in the car body. The roll stabilisation system reduces factors such as body sway in fast-driven corners and sudden direction changes.

Electric Power Steering with Servotronic serves up the familiar BMW recipe of precision, comfort and efficiency, and is unique in the BMW 6-Series Convertible's segment. Added to which, the new BMW 6-Series Convertible is the first car in its class that can be ordered - as an option - with Integral Active Steering. This system combines the Active Steering system for the front axle already available for the predecessor model with a steering rear axle, allowing the steering angle and power assistance to be controlled at both the front and the rear with the help of electric motors. Precisely harmonised wheel turns pave the way for extraordinary agility in dynamic driving situations. And Integral Active Steering also displays an impressively deft touch around twisty mountain passes and in city traffic.

Drive Dynamic Control allows a choice of suspension settings.
With Drive Dynamic Control the virtues of sportiness and comfort can take precedence as the situation demands. The driver can make his own choice of suspension settings in NORMAL, SPORT and SPORT+ modes using a button on the centre console. If the Adaptive Drive option has been specified, he can also make use of the COMFORT setting. In this mode, as well as adjusting the accelerator pedal progression, engine responses, power steering characteristics, DSC response thresholds and the shift dynamics of the automatic gearbox, Drive Dynamic Control also tweaks the damper responses and roll stabilisation settings. On cars fitted with Integral Active Steering, the basic steering set-up is also adjusted according to the mode selected, not just the level of power assistance. As a result, in SPORT and SPORT+ modes the car's sporting responses are sharpened even further.

The lightweight floating-calliper brakes with inner-vented discs are easy to use with precision, and their effectiveness is reinforced by Dynamic Stability Control (DSC). This driving stability system brings together technology such as the Anti-lock Braking System (ABS), Dynamic Traction Control (DTC), Cornering Brake Control (CBC), Dynamic Brake Control (DBC), the Start-off Assistant, the automatic Brake Drying function and brake fade compensation. Standard equipment also includes 18-inch light-alloy wheels on the new

BMW 650i Convertible or 17-inch rims for the new BMW 640i Convertible, as well as runflat tyres and a runflat indicator.

Cutting-edge comfort-enhancing features and exclusive options from BMW ConnectedDrive.
Among the comfort-enhancing features included as standard in the new BMW 6-Series Convertible are 2-zone automatic climate control with convertible mode, a hi-fi audio system with CD player and AUX-IN socket, a multifunction steering wheel, electrically operated front seats with memory function and a rain sensor with integrated automatic driving lights control. Among the highlights of the optional equipment list are Adaptive Headlights, a heated steering wheel, active seat ventilation, active seats and the Navigation system Professional with a hard disk for storing maps and personal music collections.

The new BMW 6-Series Convertible is available with an even greater variety of driver assistance systems and mobility services from BMW ConnectedDrive. It can be ordered with technology such as the Lane Change Warning System, Lane Departure Warning System, Speed Limit Info, BMW Night Vision with pedestrian recognition, rear-view camera, Surround View and the BMW Parking Assistant. Innovative technologies optimise the integration of the Apple iPhone and other smartphones, as well as music players. And, in addition to internet access, BMW ConnectedDrive also allows email messages received on a smartphone to be shown on the Control Display as well as the use of internet-based services for navigation and entertainment.

What's more, the latest-generation Head-Up Display - a unique feature in this class - is making its debut in the new BMW 6-Series Convertible. The system projects driving-related information onto the windscreen within the driver's direct field of view. The graphics and symbols are now displayed using a full spectrum of colours, allowing traffic symbols, for example, to be realistically depicted.

The BMW 6-Series Convertible: exclusive driving pleasure and a unique heritage.
The new BMW 6-Series Convertible sees the world's most successful manufacturer of premium cars building on an unparalleled tradition. The allure of exclusive driving pleasure in open-top BMW sports cars continues to hold a magnetic attraction after more than 70 years. The extraordinary history of BMW convertibles stretches from the legendary BMW 328 - which provided the basis for the winning car in the 1940 Mille Miglia - via the highly coveted BMW 507 of the 1950s, to the dynamic and groundbreaking predecessor to the new BMW 6-Series Convertible.

The new BMW 6-Series Convertible is built at the BMW plant in Dingolfing, Germany. Also rolling off the assembly line at the BMW Group's largest production plant are the BMW 7-Series and BMW 5-Series models. The flexible and efficient processes at the plant combine state-of-the-art production technology with a standard of quality defined by meticulous craftsmanship in the manufacture of premium cars configured to customer requirements.

Read More

Audi Q3 Jinlong Yufeng Concept, 2012

 

 

 

 

 

•  Audi Q3 Jinlong Yufeng Concept, 2012

Audi is presenting two themed vehicles based on the Q3 at Auto China 2012 in Beijing,  the Q3 jinlong yufeng and the RS Q3 concept. Both cars interpret the character of the compact SUV, which will launch on the Chinese market this year, in a very special way - the one is recreationally oriented and rugged while the other was systematically designed for dynamic performance.

2012 is the Chinese year of the dragon. Jinlong yufeng means "Golden Dragon in the Wind." In this way, jinlong yufeng fits in with the character of the themed vehicle. It follows the Detroit showcar and the RS Q3 concept as another variant of the compact Audi Q3 SUV and is based on the trendy and fast-moving sport of kitesurfing, in which the objective is to fearlessly control the power of the wind.

Mounted to the roof of the Audi Q3 jinlong yufeng are two kiteboards made of carbon fiber-reinforced polymer (CFRP). The designers developed a flat outdoor pouch as a special cargo floor liner. It not only provides protection against dirt, but can also be used to stow wet beach articles or can even be used as a sun umbrella or a seat cover. The kite itself can be stowed in a kite pouch, which was also specially designed for this themed vehicle. Two rugged and compact fun sport cameras known as "Audi Cams" are stored in the left side wall of the cargo space.

Kite surfers can mount the Audi Cams to the sail bar, their equipment or a helmet with an elastic band. The images are transmitted to the car via a strong WLAN router connection. From there, they can be sent with Bluetooth car phone online to any receiver via UMTS - a new unconventional idea within the range of features of Audi connect.

Zest for life and energy: the exterior
The Audi Q3 jinlong yufeng is an off-road vehicle for young, active sports enthusiasts. Its paint finish is Liuli Yellow, a luminous monochrome color that expresses a zest for life and high energy. The body add-on parts, many of which match those of the off-road package for production cars, are painted in matt quartz; this paint, built up from different gray pigments, has a natural look and is slightly rough to the touch. The high-gloss package adds small highlights around the windows.

Vertical aluminum struts in the single-frame radiator grille extend over its full height; they form a wave shape in the area where the logo appears on the production cars. The struts match the two-tone color scheme of the Audi Q3 jinlong yufeng: their sides are painted in a quartz color, while their front edges have a high-gloss finish. Certain areas inside the xenon plus headlights are tinted in anthracite, and aluminum panels cover the upper sections of the air intakes. The underbody guard protecting the engine is made of aluminum.

Flared wheel arches and brushed stainless steel running boards are prominent features on the sides of the Audi Q3 jinlong yufeng; these items will soon be added to the Q3 accessories program. The front cross-bar of the aluminum roof rail integrates small LED spotlights for illuminating the area around the car. The two flush tailpipes of the dual-branch exhaust system are integrated in the diffuser, which is partly made of aluminum - as is the rear underbody guard.

Yellow as contrasting color: the interior
Three colors dominate inside the themed vehicle, - black, gray and yellow. The roofliner consists of titanium gray Alcantara; many of the interior surfaces are black in color. The instrument panel is upholstered in black Fine Nappa leather and is decorated with yellow contrasting seams.

Fine aluminum accents glisten in the instrument cluster; cross-ribs and small fins give the dials and pointers a sculpted look. The leather-trimmed steering wheel has contrasting yellow seams, and behind it there are two large shift paddles for control of the seven-speed S tronic. The sturdy foot rests and pedal set are made of stainless steel with rubber caps.

The seats are upholstered in woven leather - narrow strips of leather just a few tenths of a millimeter wide are interwoven with yarn. The material is accentuated by yellow piping and contrasting seams. The side panels of the seat cushions and seatbacks are bright in yellow Velvet leather - a material whose look is similar to that of nubuck leather, but with a finer grain. Yellow Velvet leather is also integrated in parts of the door trim panels.

Stainless steel mesh is used for decorative inlays. Other decorative panels in high-gloss black appear all around the instruments and in large areas of the center console and tunnel; display elements and controls appear to hover in front of them. The gear selection lever has an aluminum plate with the "Q3" signature, and yellow seams decorate its shift boot.

High performance: the powertrain
The Audi Q3 jinlong yufeng employs a powerful engine. The 2.5 TFSI, a five-cylinder unit with direct injection and turbocharging, produces 228 kW (310 hp) from 2,480 cc engine displacement. The cylinder numbers are marked, and the valve cover is painted red. A cover panel conceals sections of the engine.

Power from the turbocharged five-cylinder engine flows to a seven-speed S tronic and then to the quattro permanent all-wheel drive. The Audi Q3 jinlong yufeng sprints from zero to 100 km/h (62.14 mph) in 5.5 seconds and can keep accelerating to a top speed of 250 km/h (155.34 mph).

The five-arm wheels are 8.5 J x 20 in size; their faces are machine-polished, while their sides are painted in matt quartz paint, similar in appearance to the single-frame grille. The off-road tires are 255/45. The front and rear track widths are 40 millimeters (1.57 inches) wider than those of the production version, while the ride height of the body is about 30 mm (1.18 inches) higher.

Read More